7.68 TB 2.5-inch SATA SSD, ordering code MTFDDAK7T6TDS-1AW1ZABYY
| Capacity | 7.68 TB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 0.65 |
| TBW | 9,110 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 95K IOPS |
| Random Write IOPS | 11K IOPS |
| Power | 3.9 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5300 PRO 7.68 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK7T6TDS, ordering code MTFDDAK7T6TDS-1AW1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 95K random read and 11K random write IOPS at 4 KB, 9,110 TBW — 0.65 drive writes a day for five years — on Micron 96-layer 3D TLC, with capacitor-backed power-loss protection and TCG Enterprise encryption. Stocked as sealed new drives or as tested pulls, both with a 1-year warranty from us.
This is the top of the PRO line and the last capacity where Micron kept TLC rather than moving to QLC. It is a density play rather than a speed play: 7.68 TB in a 7 mm bay at the SATA ceiling for reads, with the lowest random write rating in the family at 11K. Buy it when the rack needs capacity per slot and the workload is read-heavy, not when the workload is write-heavy.
9,110 TB over five years is 4.99 TB written every day, which at 7.68 TB of capacity is 0.65 drive writes a day. Some distributor listings round that to 0.6 DWPD; the two are not interchangeable, because 0.6 drive writes a day over five years only reaches 8,410 TB. This page uses the 9,110 TBW figure and the 0.65 that follows from it, which is what Micron publishes in its own specification table.
| Product family | Micron 5300 PRO (SATA NAND Flash SSD, read-intensive data centre) |
|---|---|
| PN | MTFDDAK7T6TDS (catalogue code) |
| Ordering code | MTFDDAK7T6TDS-1AW1ZABYY |
| Capacity | 7.68 TB (7,680 GB unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 96-layer 3D TLC |
| Sequential read | 540 MB/s (128 KB, steady state) |
| Sequential write | 520 MB/s (128 KB, steady state) |
| Random 4K read | 95K IOPS (steady state) |
| Random 4K write | 11K IOPS (steady state) |
| Endurance (TBW) | 9,110 TB |
| Endurance (DWPD) | 0.65 drive writes per day for five years |
| Quality of service | 175 µs read / 650 µs write at 99.9 percent |
| Power (read / write) | 3.9 W typical; 1.5 W idle |
| DRAM cache | Yes, LPDDR4, power-loss protected |
| Power-loss protection | Yes, capacitor-backed for data in flight |
| Encryption | AES 256-bit, TCG Enterprise configurability |
| MTTF | 3 million device hours |
| Weight | < 70 g |
Random write has fallen at every step up this family — 40K at 240 GB, 22K at 3.84 TB, 11K here — because the same controller queue is spread across more dies and the workload rating stays fixed. What rises instead is density and absolute write budget: 4.99 TB a day versus 2.88 TB on the 1.92 TB part. Against the 5200 ECO at this size the newer drive is ahead on both counts, 9,110 TB against 8,400 and 11K random write against 9.5K.
One row in the comparison below beats this drive on endurance and loses badly everywhere else: the 5210 ION is QLC, rated 11,200 TBW but only 360 MB/s sequential write and 4.5K random write. If the host is a backup target or an archive tier, that trade can be the right one; if it serves anything interactive, it is not.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK7T6TDS | Catalogue code (bare PN) | new or used | Enquire |
| MTFDDAK7T6TDS-1AW1ZABYY | Standard (non-SED) | new or used | Enquire |
| MTFDDAK7T6TDS-1AW15ABYY | TCG Opal 2 SED | new or used | Enquire |
| MTFDDAK7T6TDS-1AW16ABYY | TCG Enterprise SED | new or used | Enquire |
Four codes are quoted for this capacity and the trailing block carries the security build: Z is the plain drive, 5 is TCG Opal 2, 6 is TCG Enterprise. All four are available new or as a tested pull, on the same lead time.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5100 ECO 7.68 TB | 7.68 TB | 540 / 520 MB/s | 93K / 9K IOPS | 8,400 TB (0.6 DWPD) | 6 W | Read-intensive, 32-layer TLC |
| Micron 5200 ECO 7.68 TB | 7.68 TB | 540 / 520 MB/s | 95K / 9.5K IOPS | 8,400 TB (0.6 DWPD) | 3.6 W | Read-intensive, 64-layer TLC |
| Micron 5300 PRO 7.68 TB | 7.68 TB | 540 / 520 MB/s | 95K / 11K IOPS | 9,110 TB (0.65 DWPD) | 3.9 W | Read-intensive, 96-layer TLC |
| Micron 5210 ION 7.68 TB | 7.68 TB | 540 / 360 MB/s | 90K / 4.5K IOPS | 11,200 TB (0.8 DWPD) | 3.6 W | Read-intensive QLC |
Every row is a Micron datasheet number at 128 KB sequential and 4 KB random, steady state, with the three companion rows taken from pages already catalogued on this site. The power column mixes a single typical figure for the three older drives with one figure for this one, so read it as an envelope rather than a measured comparison.
At 7.68 TB the whole-span write pass takes a good part of a day, so a unit is not shipped on the strength of a short self-test: the bench records model and firmware at power-up, writes the full span, reads it back, captures SMART at both ends and exercises the capacitors. Sustained write behaviour is the thing this exposes, and at this capacity thermal throttling during a long write is the realistic failure mode. Sealed drives ship sealed; pulls are wiped and verified before dispatch.
New and used units both come with one year of cover from us. Stock sits in our own warehouse and normally dispatches within three to seven working days, with tracking issued at that point. Minimum order is two pieces, capacities from one series combine on a single order, and a quote is answered the same working day once part number, condition and quantity are clear.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV