480 GB 2.5-inch SATA SSD, ordering code MTFDDAK480TGA-1BC1ZABYY
| Capacity | 480 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 1.5 |
| TBW | 1,324 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 95K IOPS |
| Random Write IOPS | 37K IOPS |
| Power | 3.9 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5400 PRO 480 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK480TGA, ordering code MTFDDAK480TGA-1BC1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 95K random read and 37K random write IOPS at 4 KB, 1,324 TBW — 1.5 drive writes a day for five years — on Micron 176-layer 3D TLC, with power-loss protection, end-to-end data path protection and TCG Enterprise encryption options. Held as sealed new drives or tested pulls, each with a 1-year warranty from us.
At this capacity the 5400 PRO reaches the SATA ceiling on writes: 520 MB/s, where the 240 GB part stops at 350. Read IOPS climbs to 95K at the same time, and endurance doubles to 1,324 TBW, still at 1.5 drive writes a day. Against the previous generation at the same size the gain is concentrated in the write path — 520 MB/s against the 5300 PRO's 410 — because the read side was already at the interface limit.
Two things happen between 240 GB and 480 GB in this family. The die count doubles, so a write can be spread across twice as many planes at once, and the drive's endurance budget doubles with capacity at a fixed 1.5 drive writes a day. Between them the sequential write rating moves from 350 MB/s to 520, and random read from 75K to 95K IOPS, while random write barely shifts, 37K in both cases. That last number is the honest limit of the read-intensive tuning: this part is built to write steadily, not to answer a storm of small writes.
| Product family | Micron 5400 PRO (SATA NAND Flash SSD, read-intensive data centre) |
|---|---|
| PN | MTFDDAK480TGA (catalogue code) |
| Ordering code | MTFDDAK480TGA-1BC1ZABYY |
| Capacity | 480 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 176-layer 3D TLC |
| Sequential read | 540 MB/s (128 KB, steady state) |
| Sequential write | 520 MB/s (128 KB, steady state) |
| Random 4K read | 95K IOPS (steady state) |
| Random 4K write | 37K IOPS (steady state) |
| Endurance (TBW) | 1,324 TB |
| Endurance (DWPD) | 1.5 drive writes per day for five years |
| Quality of service | 170 µs read / 42 µs write at 99.9 percent, queue depth 1 |
| Power (read / write) | < 3.0 W read / < 3.9 W write active average |
| DRAM cache | Yes, power-loss protected |
| Power-loss protection | Yes, capacitor-backed plus end-to-end data path protection |
| Encryption | AES 256-bit, TCG Enterprise and TCG Opal builds |
| MTTF | 3 million device hours |
| Weight | < 70 g |
1,324 TB over 1,825 days is 0.72 TB written every day, 1.5 times the drive's own capacity. It is the same figure the 5300 PRO quotes at this size, because the workload class has not changed between generations — 1.5 drive writes a day over five years produces an identical total. A host that stays inside 0.72 TB a day can treat the two generations as interchangeable on endurance and choose on write throughput; a host that needs more should be looking at the MAX tier, where 480 GB carries 4,380 TBW at 5 drive writes a day.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK480TGA | Catalogue code (bare PN) | new or used | Enquire |
| MTFDDAK480TGA-1BC1ZABYY | Standard (non-SED) | new or used | Enquire |
| MTFDDAK480TGA-1BC15ABYY | TCG Opal 2 SED | new or used | Enquire |
| MTFDDAK480TGA-1BC16ABYY | TCG Enterprise SED | new or used | Enquire |
Four codes are quoted, all with the 1BC1 block that identifies the 5400 generation. A 5300 code will not pull this drive, and a 5400 code will not pull a 5300 — the security suffix sits inside a different block on each. Within the 5400 range the final letter before ABYY is Z for plain, 5 for TCG Opal 2 and 6 for TCG Enterprise.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5300 PRO 480 GB | 480 GB | 540 / 410 MB/s | 85K / 36K IOPS | 1,324 TB (1.5 DWPD) | 2.5 / 3.1 W | Read-intensive, 96-layer TLC |
| Micron 5400 PRO 480 GB | 480 GB | 540 / 520 MB/s | 95K / 37K IOPS | 1,324 TB (1.5 DWPD) | 3.0 / 3.9 W | Read-intensive, 176-layer TLC |
| Micron 5200 MAX 480 GB | 480 GB | 540 / 460 MB/s | 93K / 70K IOPS | 4,380 TB (5 DWPD) | 3.6 W | Mixed-use, 64-layer TLC |
| Micron 5300 MAX 480 GB | 480 GB | 540 / 460 MB/s | 95K / 60K IOPS | 4,380 TB (5 DWPD) | 3.0 / 3.9 W | Mixed-use, 96-layer TLC |
The two PRO rows above are generation-related and priced differently; the two MAX rows are a different endurance class entirely. Values are Micron datasheet figures at 128 KB sequential and 4 KB random, steady state. Note the power column mixes a single typical figure for the 5200 entry with read and write maxima for the 5300 and 5400 entries, so read it as an envelope rather than a measurement.
The bench routine for this capacity starts cold: the drive is identified before the host has written anything, then the full span is written and read back, SMART is captured at both ends and the capacitors are discharged and re-tested rather than trusted. Because a 480 GB drive tends to become the boot device, the pass finishes with a cold-start check and a model-versus-label comparison. Sealed units leave sealed; pulls are wiped and verified before dispatch.
Cover for one year comes from us on either condition, so a used pull is not left with only the platform vendor behind it. Stock sits in our own warehouse and normally dispatches within three to seven working days, with tracking issued at that point. Minimum order is two pieces, capacities from one series combine on an order, and quotes go back the same working day given part number, condition and quantity.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV