480 GB 2.5-inch SATA SSD, ordering code MTFDDAK480TDT-1AW1ZABYY
| Capacity | 480 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 5 |
| TBW | 4,380 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 460 MB/s |
| Random Read IOPS | 95K IOPS |
| Random Write IOPS | 60K IOPS |
| Power | 3.9 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5300 MAX 480 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK480TDT, ordering code MTFDDAK480TDT-1AW1ZABYY. 540 MB/s sequential read, 460 MB/s sequential write, 95K random read and 60K random write IOPS at 4 KB, 4,380 TBW — 5 drive writes a day for five years — on Micron 96-layer 3D TLC, with power-loss protection and TCG Enterprise encryption. Kept as sealed new drives or tested pulls, each with a 1-year warranty from us.
The MAX build raises what a 480 GB drive can absorb to 2.4 TB of writes a day and lifts sequential write to 460 MB/s, the SATA ceiling for this capacity. It is not, however, the highest random write in the tier: 60K IOPS sits below both older MAX drives at the same size, which is worth knowing before the order goes in.
Three numbers separate this drive from the 5300 PRO at the same capacity. Endurance goes from 1,324 TBW to 4,380, sequential write from 410 MB/s to 460, random write from 36K to 60K. The read side barely moves — 540 MB/s and 95K read IOPS either way — so the extra spend buys write headroom only. That is a good trade for a journal volume, a cache tier or a virtualisation host that carries swap, and a poor one for a drive that mostly answers reads.
| Product family | Micron 5300 MAX (SATA NAND Flash SSD, mixed-use data centre) |
|---|---|
| PN | MTFDDAK480TDT (catalogue code) |
| Ordering code | MTFDDAK480TDT-1AW1ZABYY |
| Capacity | 480 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 96-layer 3D TLC |
| Sequential read | 540 MB/s (128 KB, steady state) |
| Sequential write | 460 MB/s (128 KB, steady state) |
| Random 4K read | 95K IOPS (steady state) |
| Random 4K write | 60K IOPS (steady state) |
| Endurance (TBW) | 4,380 TB |
| Endurance (DWPD) | 5 drive writes per day for five years |
| Quality of service | 175-200 µs read / 100-650 µs write |
| Power (read / write) | 3.0 W read / 3.9 W write maximum; 1.5 W idle |
| DRAM cache | Yes, LPDDR4, power-loss protected |
| Power-loss protection | Yes, capacitor-backed for data in flight |
| Encryption | AES 256-bit, TCG Enterprise configurability |
| MTTF | 3 million device hours |
| Weight | < 70 g |
4,380 TB over five years is 2.4 TB written every day, five times the drive's own capacity per day and 3.3 times the 5300 PRO budget at this size. Against the older MAX drives the figure is level rather than better: 4,380 TB for the 5200 MAX and 4,400 TB for the 5100 MAX. Within a few tenths of a percent all three are the same promise, and the choice between them comes down to what the rest of the row says.
That rest-of-row comparison does not flatter this drive on every line. Its 95K read is the highest of the three, its 3.0 W read figure is the lowest, and its random write of 60K is the lowest too — 10K behind the 5200 MAX and 14K behind the 5100 MAX. A workload bound on write IOPS should take the 5200 MAX; a workload that reads heavily and writes in bursts is better served here.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK480TDT | Catalogue code (bare PN) | new or used | Enquire |
| MTFDDAK480TDT-1AW1ZABYY | Standard (non-SED) | new or used | Enquire |
| MTFDDAK480TDT-1AW15ABYY | TCG Opal 2 SED | new or used | Enquire |
| MTFDDAK480TDT-1AW16ABYY | TCG Enterprise SED | new or used | Enquire |
Four codes cover this capacity and the trailing block sets the security build: Z for the plain drive, 5 for TCG Opal 2, 6 for TCG Enterprise. All four are available new or as a tested pull, on the same lead time.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5300 PRO 480 GB | 480 GB | 540 / 410 MB/s | 85K / 36K IOPS | 1,324 TB (1.5 DWPD) | 2.5 / 3.1 W | Read-intensive, 96-layer TLC |
| Micron 5100 MAX 480 GB | 480 GB | 540 / 460 MB/s | 93K / 74K IOPS | 4,400 TB (5 DWPD) | 4.5 W | Mixed-use, 32-layer TLC |
| Micron 5200 MAX 480 GB | 480 GB | 540 / 460 MB/s | 93K / 70K IOPS | 4,380 TB (5 DWPD) | 3.6 W | Mixed-use, 64-layer TLC |
| Micron 5300 MAX 480 GB | 480 GB | 540 / 460 MB/s | 95K / 60K IOPS | 4,380 TB (5 DWPD) | 3.0 / 3.9 W | Mixed-use, 96-layer TLC |
Values are Micron datasheet figures at 128 KB sequential and 4 KB random, steady state, and the three older rows are taken from pages already on this site. Note the power column is not measured the same way in each row: the 5100 and 5200 entries quote a single figure, while the 5300 entry separates read from write.
Every 480 GB unit is powered up, identified to firmware level, written across its whole span and read back, with SMART logged at both ends and the capacitors discharged and re-tested rather than assumed. A mixed-use drive is likely to be installed as a write target, so the bench pass also records whether throughput holds after the fast-write cache is exhausted. Sealed drives ship sealed; pulls are wiped and verified before dispatch.
Both conditions come with a one-year warranty from us. Stock sits in our own warehouse and normally dispatches within three to seven working days, with tracking issued at that point. Minimum order is two pieces, capacities from one series combine on an order, and a quote is answered the same working day once part number, condition and quantity are clear.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV