480 GB 2.5-inch SATA SSD, ordering code MTFDDAK480TDS-1AW1ZABYY
| Capacity | 480 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 1.5 |
| TBW | 1,324 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 410 MB/s |
| Random Read IOPS | 85K IOPS |
| Random Write IOPS | 36K IOPS |
| Power | 3.1 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5300 PRO 480 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK480TDS, ordering code MTFDDAK480TDS-1AW1ZABYY. 540 MB/s sequential read, 410 MB/s sequential write, 85K random read and 36K random write IOPS at 4 KB, 1,324 TBW — 1.5 drive writes a day for five years — on Micron 96-layer 3D TLC, with capacitor-backed power-loss protection and TCG Enterprise encryption. Held in stock as new sealed drives or as tested pulls, both carrying a 1-year warranty from us.
Doubling the capacity from 240 GB does more than add space. At the same 1.5 drive writes a day the write budget moves from 657 TB to 1,324 TB, and random read climbs from 67K to 85K IOPS, while random write eases from 40K to 36K — the pattern this family follows as capacity grows. What the 480 GB buys is a node that can hold a working set, not only an operating system.
This is the size for a host that runs an operating system, the hypervisor, its logs and a handful of service VMs on one device. Sequential read sits at the SATA ceiling, so boot time is decided by firmware and service count rather than by this part; the number that decides whether the drive lasts is the write budget, and 1,324 TB covers a logging volume that outgrows the boot image.
| Product family | Micron 5300 PRO (SATA NAND Flash SSD, read-intensive data centre) |
|---|---|
| PN | MTFDDAK480TDS (catalogue code) |
| Ordering code | MTFDDAK480TDS-1AW1ZABYY |
| Capacity | 480 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 96-layer 3D TLC |
| Sequential read | 540 MB/s (128 KB, steady state) |
| Sequential write | 410 MB/s (128 KB, steady state) |
| Random 4K read | 85K IOPS (steady state) |
| Random 4K write | 36K IOPS (steady state) |
| Endurance (TBW) | 1,324 TB |
| Endurance (DWPD) | 1.5 drive writes per day for five years |
| Quality of service | 175-200 µs read / 100-650 µs write |
| Power (read / write) | 2.5 / 3.1 W typical; 1.5 W idle |
| DRAM cache | Yes, LPDDR4, power-loss protected |
| Power-loss protection | Yes, capacitor-backed for data in flight |
| Encryption | AES 256-bit, TCG Enterprise configurability |
| MTTF | 3 million device hours |
| Weight | < 70 g |
Spread over a five-year service life, 1,324 TB is about 0.72 TB of writing every day, which is 1.5 times the drive's own capacity. Against the 5200 ECO at the same size, rated 870 TB, the gap is 454 TB — roughly 630 further days at that daily rate. It also edges past the 1,300 TB of the 5100 PRO it replaces. For a node writing logs and container layers, that gap is the difference between replacing drives on a schedule you set and replacing them when a wear indicator says so.
Endurance at this level is quoted for a five-year life, so the figure to plan against is the peak write rate rather than the average. A workload that bursts to several terabytes a day for a week is the case worth sizing on DWPD, not on the terabyte total.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK480TDS | Catalogue code (bare PN) | new or used | Enquire |
| MTFDDAK480TDS-1AW1ZABYY | Standard (non-SED) | new or used | Enquire |
| MTFDDAK480TDS-1AW15ABYY | TCG Opal 2 SED | new or used | Enquire |
| MTFDDAK480TDS-1AW16ABYY | TCG Enterprise SED | new or used | Enquire |
Four codes cover this capacity. The bare catalogue number is what most purchase orders carry; the full ordering codes fix the security build, and the block after the dash is what separates them: Z is the plain build, 5 is TCG Opal 2 and 6 is TCG Enterprise. Any of the four can be quoted as new or as a tested pull.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5300 PRO 480 GB | 480 GB | 540 / 410 MB/s | 85K / 36K IOPS | 1,324 TB (1.5 DWPD) | 2.5 / 3.1 W | Read-intensive, 96-layer TLC |
| Micron 5200 ECO 480 GB | 480 GB | 540 / 385 MB/s | 81K / 33K IOPS | 870 TB (1 DWPD) | 3.6 W | Read-intensive, 64-layer TLC |
| Micron 5200 MAX 480 GB | 480 GB | 540 / 460 MB/s | 93K / 70K IOPS | 4,380 TB (5 DWPD) | 3.6 W | Mixed-use, 64-layer TLC |
| Micron 5100 PRO 480 GB | 480 GB | 540 / 410 MB/s | 93K / 43K IOPS | 1,300 TB (1.48 DWPD) | 4.5 W | Read-intensive, 32-layer TLC |
Every row is Micron datasheet data at 128 KB sequential and 4 KB random under steady state. The three older parts are already catalogued on this site, so their columns come from our own published records rather than from a single comparison sheet.
A 480 GB unit runs the full bench cycle rather than a spot check: firmware and model read at power-up, a full-span write followed by a read-back, SMART captured before and after, and the power-loss capacitors discharged and re-tested instead of taken on trust. Reported capacity is confirmed against the label on the drive. Sealed units leave sealed; pulls are wiped and re-verified before dispatch.
New and used both carry one year of cover from us, and a single order can mix the two conditions. Stock sits in our own warehouse and normally dispatches within three to seven working days, tracking issued at that point. Minimum order is two pieces and capacities from the same series combine. A quote comes back the same working day once the part number, condition and quantity are clear.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV