Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK240TGA · Micron

Micron 5400 PRO 240 GB SATA SSD (MTFDDAK240TGA)

240 GB 2.5-inch SATA SSD, ordering code MTFDDAK240TGA-1BC1ZABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK240TGA
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 240 GB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 1.5
TBW 657 TB
Sequential Read 540 MB/s
Sequential Write 350 MB/s
Random Read IOPS 75K IOPS
Random Write IOPS 37K IOPS
Power 3.9 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

Both. Sealed drives and tested pulls of MTFDDAK240TGA are held in stock with a one-year warranty from us; state the condition you need and the quote reflects it.

NAND generation and write throughput. This drive runs 176-layer TLC at 350 MB/s sequential write with 75K random read; the 5300 PRO is 96-layer at 310 MB/s and 67K. Endurance is identical at 657 TBW and 1.5 DWPD, and the 5300 PRO is 3K ahead on random write.

No. 5400 parts carry a 1BC1 block after the dash, where 5300 parts carry 1AW1. Order the 5400 code for a 5400 drive; substituting an older code will not pull the newer model.

Micron rates active average power at 3.0 W for sequential reads and 3.9 W for sequential writes, on a standard 5 V SATA power connector. No 12 V rail is required.

It is a 2.5-inch, 7 mm, hot-plug SATA 6 Gb/s drive, so a 2.5-inch bay or a 3.5-inch caddy adapter holds it. It is not PCIe, NVMe or U.2 and will not fit an M.2 slot.

Stock is held in our own warehouse and normally dispatches within three to seven working days; tracking is issued at dispatch. Larger quantities are quoted with a lead time rather than an estimate.

Micron 5400 PRO 240 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK240TGA, ordering code MTFDDAK240TGA-1BC1ZABYY. 540 MB/s sequential read, 350 MB/s sequential write, 75K random read and 37K random write IOPS at 4 KB, 657 TBW — 1.5 drive writes a day for five years — on Micron 176-layer 3D TLC, with power-loss protection, end-to-end data path protection and TCG Enterprise encryption options. Supplied as sealed new drives or tested pulls, each with a 1-year warranty from us.

This is the eleventh generation of Micron SATA data-centre drive and the first on 176-layer NAND, which is why a 240 GB part now writes at 350 MB/s rather than the 310 MB/s of the 96-layer generation. Endurance is unchanged at 657 TBW and read IOPS climb from 67K to 75K; the one number that goes the other way is random write, 37K against 40K.

What the 176-layer generation changes

Higher layer count buys density inside the package, and the visible effect on a small capacity is wider write: 350 MB/s sequential against 310, and 75K random read against 67K. The endurance rating stays at 1.5 drive writes a day because it is set by the workload class, not the NAND stack. What that means in practice is a boot-and-services drive that finishes a write pass sooner and answers more reads, while promising the same five-year write budget as the part it replaces.

Technical specifications

Product familyMicron 5400 PRO (SATA NAND Flash SSD, read-intensive data centre)
PNMTFDDAK240TGA (catalogue code)
Ordering codeMTFDDAK240TGA-1BC1ZABYY
Capacity240 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm)
InterfaceSATA 6 Gb/s, hot-plug capable, NCQ to depth 32
NANDMicron 176-layer 3D TLC
Sequential read540 MB/s (128 KB, steady state)
Sequential write350 MB/s (128 KB, steady state)
Random 4K read75K IOPS (steady state)
Random 4K write37K IOPS (steady state)
Endurance (TBW)657 TB
Endurance (DWPD)1.5 drive writes per day for five years
Quality of service170 µs read / 150 µs write at 99.9 percent, queue depth 1
Power (read / write)3.0 W read / 3.9 W write active average
DRAM cacheYes, power-loss protected
Power-loss protectionYes, capacitor-backed plus end-to-end data path protection
EncryptionAES 256-bit, TCG Enterprise and TCG Opal builds
MTTF3 million device hours
Weight< 70 g

Reading 657 TBW at this capacity

657 TB across 1,825 days is 0.36 TB written every day, 1.5 times the drive's own capacity. That figure is identical to the 5300 PRO at 240 GB and within 1 percent of the 5100 PRO's 650 TB, so endurance is not where this generation separates itself — the write throughput is. If a design is already sitting comfortably inside 0.36 TB a day, this drive is a drop-in replacement that costs less time per write; if the workload needs more than that, the 5300 MAX at 2,190 TBW is the part to look at instead.

The rating assumes 100 percent random 4K writes at 55 degrees case temperature. Sequential traffic consumes the budget more slowly, which is why a boot volume rarely approaches the number even after years in service.

Ordering codes and the security block

CodeTypeConditionQuote
MTFDDAK240TGACatalogue code (bare PN)new or usedEnquire
MTFDDAK240TGA-1BC1ZABYYStandard (non-SED)new or usedEnquire
MTFDDAK240TGA-1BC15ABYYTCG Opal 2 SEDnew or usedEnquire
MTFDDAK240TGA-1BC16ABYYTCG Enterprise SEDnew or usedEnquire

Four codes are quoted at this capacity. Note the block after the dash differs from the 5300 generation — 5400 parts carry a 1BC1 prefix — so an old 5300 code cannot be substituted for a 5400 order. Within the 5400 range, Z is the plain drive, 5 is the TCG Opal 2 build and 6 is TCG Enterprise.

How the 240 GB compares across the generations

ModelCapacitySequential read / writeRandom 4K read / writeEndurancePowerClass
Micron 5100 PRO 240 GB240 GB540 / 250 MB/s78K / 26K IOPS650 TB (1.48 DWPD)4.5 WRead-intensive, 32-layer TLC
Micron 5300 PRO 240 GB240 GB540 / 310 MB/s67K / 40K IOPS657 TB (1.5 DWPD)3.9 WRead-intensive, 96-layer TLC
Micron 5400 PRO 240 GB240 GB540 / 350 MB/s75K / 37K IOPS657 TB (1.5 DWPD)3.0 / 3.9 WRead-intensive, 176-layer TLC
Micron 5300 MAX 240 GB240 GB540 / 380 MB/s82K / 60K IOPS2,190 TB (5 DWPD)3.0 / 3.9 WMixed-use, 96-layer TLC

The three companion rows come from pages already catalogued on this site; every figure in the table is a Micron datasheet value at 128 KB sequential or 4 KB random, steady state. Compare the write columns directly: this drive beats both older PRO parts on sequential and random read, trails the 5300 PRO by 3K on random write, and sits well below the MAX tier on endurance and write IOPS alike.

How each drive is tested before it ships

A 240 GB unit is small enough for an exhaustive pass, so it gets one: firmware and model read at power-up, the whole span written and read back, SMART logged at both ends, capacitors discharged and re-tested. Because this capacity usually runs as a boot or metadata device, the bench also confirms the drive initialises cleanly from a cold start and that its reported model and capacity match the label. Sealed drives ship sealed; pulls are wiped and verified before dispatch.

Warranty, lead time and purchasing

One year of cover applies to new and used units alike, and it comes from us. Stock sits in our own warehouse and normally dispatches within three to seven working days, with tracking issued at that point. Minimum order is two pieces, capacities from the same series combine on one order, and a quote is answered the same working day once part number, condition and quantity are clear.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View