240 GB 2.5-inch SATA SSD, ordering code MTFDDAK240TDT-1AW1ZABYY
| Capacity | 240 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 5 |
| TBW | 2,190 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 380 MB/s |
| Random Read IOPS | 82K IOPS |
| Random Write IOPS | 60K IOPS |
| Power | 3.9 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5300 MAX 240 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK240TDT, ordering code MTFDDAK240TDT-1AW1ZABYY. 540 MB/s sequential read, 380 MB/s sequential write, 82K random read and 60K random write IOPS at 4 KB, 2,190 TBW — 5 drive writes a day for five years — on Micron 96-layer 3D TLC, with capacitor-backed power-loss protection and TCG Enterprise encryption. Held as sealed new drives or as tested pulls, each with a 1-year warranty from us.
MAX is the endurance half of the 5300 family, built for write-heavy work rather than reads. At 240 GB it carries the same tolerance as the two MAX generations before it, near 2.2 petabytes written, but pushes random write to 60K IOPS and sequential write to 380 MB/s, both higher than the 5300 PRO at the same capacity.
Against the 5300 PRO 240 GB the difference is not subtle: 2,190 TB of total writes instead of 657, random write 60K instead of 40K, sequential write 380 MB/s instead of 310. All three come from the same 96-layer NAND and the same controller; the endurance budget is what changes. That matters where the drive is a write target rather than a boot device — a database log volume, a cache tier, a virtualisation host carrying swap — and it stops mattering the moment the workload is read-mostly, because read performance is identical across both tiers.
| Product family | Micron 5300 MAX (SATA NAND Flash SSD, mixed-use data centre) |
|---|---|
| PN | MTFDDAK240TDT (catalogue code) |
| Ordering code | MTFDDAK240TDT-1AW1ZABYY |
| Capacity | 240 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 96-layer 3D TLC |
| Sequential read | 540 MB/s (128 KB, steady state) |
| Sequential write | 380 MB/s (128 KB, steady state) |
| Random 4K read | 82K IOPS (steady state) |
| Random 4K write | 60K IOPS (steady state) |
| Endurance (TBW) | 2,190 TB |
| Endurance (DWPD) | 5 drive writes per day for five years |
| Quality of service | 175-200 µs read / 100-650 µs write |
| Power (read / write) | 3.0 W read / 3.9 W write maximum; 1.5 W idle |
| Label rating | 5 V, 1.7 A as printed on the drive label |
| DRAM cache | Yes, LPDDR4, power-loss protected |
| Power-loss protection | Yes, capacitor-backed for data in flight |
| Encryption | AES 256-bit, TCG Enterprise configurability |
| MTTF | 3 million device hours |
| Weight | < 70 g |
2,190 TB over a five-year life is 1.2 TB written every day, five times the drive's own capacity per day. That is the highest daily allowance in the 240 GB class on this site: the 5300 PRO at the same size allows 0.36 TB a day, the 5100 PRO before it 0.36 TB, and only the 5200 MAX and 5100 MAX reach the same 1.2 TB. Compared with the 5200 MAX the figures are effectively level — 2,190 TB against 2,200 — so the case for this drive is not the total, it is the 60K random write and the higher sequential write that come with the 96-layer build.
The rating is measured on 100 percent random 4K writes. A sequential stream consumes the budget more slowly, so a 240 GB drive in a logging role typically lands well inside the figure rather than at it.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK240TDT | Catalogue code (bare PN) | new or used | Enquire |
| MTFDDAK240TDT-1AW1ZABYY | Standard (non-SED) | new or used | Enquire |
| MTFDDAK240TDT-1AW15ABYY | TCG Opal 2 SED | new or used | Enquire |
| MTFDDAK240TDT-1AW16ABYY | TCG Enterprise SED | new or used | Enquire |
Four codes exist for this capacity, and the trailing block fixes the security build: Z is the plain drive, 5 is TCG Opal 2, 6 is TCG Enterprise. Any of the four can be quoted new or as a tested pull; the label photo on this page shows a -1AW1ZABYY unit with firmware D3MU001.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5300 PRO 240 GB | 240 GB | 540 / 310 MB/s | 67K / 40K IOPS | 657 TB (1.5 DWPD) | 3.0 / 3.9 W | Read-intensive, 96-layer TLC |
| Micron 5100 MAX 240 GB | 240 GB | 540 / 310 MB/s | 93K / 48K IOPS | 2,200 TB (5 DWPD) | 4.5 W | Mixed-use, 32-layer TLC |
| Micron 5200 MAX 240 GB | 240 GB | 540 / 310 MB/s | 81K / 53K IOPS | 2,200 TB (5 DWPD) | 3.6 W | Mixed-use, 64-layer TLC |
| Micron 5300 MAX 240 GB | 240 GB | 540 / 380 MB/s | 82K / 60K IOPS | 2,190 TB (5 DWPD) | 3.0 / 3.9 W | Mixed-use, 96-layer TLC |
Rows are Micron datasheet values at 128 KB sequential and 4 KB random, steady state; the three older rows are read from pages already on this site. Two details are worth reading off the table: the 5100 MAX matches the endurance of the newer drives but pays 4.5 W for it, and the 5200 MAX is level on TBW while sitting 7K behind on random write.
A 240 GB unit is small enough to test exhaustively, so it is: firmware and model read at power-up, the entire span written and read back, SMART recorded before and after, capacitors discharged and re-tested. Because this capacity often runs as a write target, the bench pass also watches for write throughput collapsing once the SLC cache is exhausted — the failure mode buyers actually notice. Sealed units ship sealed; pulls are wiped and verified before dispatch.
Cover is one year on both conditions, provided by us. Stock sits in our own warehouse and normally dispatches within three to seven working days, with tracking issued at that point. Minimum order is two pieces, capacities from the same series combine on one order, and a quote goes back the same working day once part number, condition and quantity are clear.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV