Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK1T9TGA · Micron

Micron 5400 PRO 1.92 TB SATA SSD (MTFDDAK1T9TGA)

1.92 TB 2.5-inch SATA SSD, ordering code MTFDDAK1T9TGA-1BC1ZABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK1T9TGA
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 1.92 TB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 1.5
TBW 5,256 TB
Sequential Read 540 MB/s
Sequential Write 520 MB/s
Random Read IOPS 95K IOPS
Random Write IOPS 33K IOPS
Power 3.6 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

Yes, MTFDDAK1T9TGA is stocked sealed and as tested pulls, and the one-year warranty we give covers either. State the condition when you ask for a price so the quote matches what you can accept.

No, it is identical at 5,256 TBW and 1.5 DWPD. What does improve is the write path: 33K random write against 30K, and a 120 microsecond write latency against roughly 300. If endurance is the deciding factor, the 5200 PRO at this capacity rates 5,950 TBW.

About 2.88 TB per day over five years. That covers boot pairs running container images, journals and logs with headroom; hosts routinely writing more than that should look at the 5300 MAX 1.92 TB, rated 17,520 TBW at 5 drive writes a day.

They do. -1BC1ZABYY is the plain drive, -1BC15ABYY is TCG Opal 2 and -1BC16ABYY is TCG Enterprise; the bare code MTFDDAK1T9TGA is accepted as well. A 5300 code with 1AW1 there is a different generation and will not pull this part.

Physically yes, both are 2.5-inch 7 mm hot-plug SATA and share the same connector and power draw class. Check the array or backplane capacity table before swapping, because some older controllers cap per-slot capacity well below 1.92 TB.

Stock held in our own warehouse normally dispatches within three to seven working days with tracking issued at dispatch. Quantities beyond stock are quoted with a stated lead time rather than an estimate.

Micron 5400 PRO 1.92 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK1T9TGA, ordering code MTFDDAK1T9TGA-1BC1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 95K random read and 33K random write IOPS at 4 KB, 5,256 TBW at 1.5 drive writes a day, on 176-layer 3D TLC, with capacitor-backed power-loss protection, end-to-end data path protection and TCG encryption builds. Supplied sealed or as tested pulls, both with a 1-year warranty from us.

This is the capacity most often bought in pairs. 1.92 TB gives a mirrored boot volume with room for the hypervisor, its logs and a working set that would not fit on 960 GB, while the throughput numbers stay exactly where the smaller drive put them — 540 and 520 MB/s, 95K random read. Everything the extra capacity buys here is endurance and space, and that is the trade this page is about.

What actually changes against the 5300 PRO at the same size

Two figures move in your favour and one does not. Random write rises from 30K to 33K IOPS and write latency falls from roughly 300 µs to 120 µs, both real gains for anything that logs. Endurance stays exactly where it was, 5,256 TBW at 1.5 drive writes a day, because the workload class is unchanged; and the 5200 PRO from two generations back still quotes more of it, 5,950 TBW at 1.7. Choose this drive for the platform, the latency and the supply, not for a bigger endurance number.

Technical specifications

Product familyMicron 5400 PRO (SATA NAND Flash SSD, read-intensive data centre)
PNMTFDDAK1T9TGA (catalogue code)
Ordering codeMTFDDAK1T9TGA-1BC1ZABYY
Capacity1.92 TB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm)
InterfaceSATA 6 Gb/s, hot-plug capable, NCQ to depth 32
NANDMicron 176-layer 3D TLC
Sequential read540 MB/s (128 KB, steady state)
Sequential write520 MB/s (128 KB, steady state)
Random 4K read95K IOPS (steady state)
Random 4K write33K IOPS (steady state)
Endurance (TBW)5,256 TB
Endurance (DWPD)1.5 drive writes per day for five years
Quality of service170 µs read / 120 µs write at 99.9 percent, queue depth 1
Power (read / write)3.0 W read / 3.6 W write active average, 1.5 W idle
DRAM cacheYes, power-loss protected
Power-loss protectionYes, capacitor-backed plus end-to-end data path protection
EncryptionAES 256-bit, TCG Enterprise and TCG Opal builds
MTTF3 million device hours
Weight< 70 g

Reading 5,256 TBW as a daily budget

Divided across 1,825 days the rating allows 2.88 TB written per day, one and a half times the drive's capacity. That is a comfortable ceiling for a boot pair carrying container images, journals and logs, and it is deliberately conservative in one respect: Micron measures lifetime TBW with fully random aligned 4 KB writes at 55 °C case temperature, a harsher pattern than most real hosts generate. A workload that already exceeds 2.88 TB a day belongs on the MAX tier, where the same capacity rates 17,520 TBW at 5 drive writes a day.

Ordering codes and the security block

CodeTypeConditionQuote
MTFDDAK1T9TGACatalogue code (bare PN)new or usedEnquire
MTFDDAK1T9TGA-1BC1ZABYYStandard (non-SED)new or usedEnquire
MTFDDAK1T9TGA-1BC15ABYYTCG Opal 2 SEDnew or usedEnquire
MTFDDAK1T9TGA-1BC16ABYYTCG Enterprise SEDnew or usedEnquire

All four codes sit inside the 1BC1 block, which is the marker for a 5400-generation drive; the 5300 generation uses 1AW1 in the same position and the two do not substitute. Immediately before ABYY, Z is the plain drive, 5 adds TCG Opal 2 and 6 adds TCG Enterprise, and the remaining characters are fixed by Micron.

How the 1.92 TB sits against the other Micron tiers

ModelCapacitySequential read / writeRandom 4K read / writeEndurancePowerClass
Micron 5300 PRO 1.92 TB1.92 TB540 / 520 MB/s95K / 30K IOPS5,256 TB (1.5 DWPD)3.0 / 3.8 WRead-intensive, 96-layer TLC
Micron 5400 PRO 1.92 TB1.92 TB540 / 520 MB/s95K / 33K IOPS5,256 TB (1.5 DWPD)3.0 / 3.6 WRead-intensive, 176-layer TLC
Micron 5200 PRO 1.92 TB1.92 TB540 / 520 MB/s95K / 32K IOPS5,950 TB (1.7 DWPD)3.6 WRead-intensive, 64-layer TLC
Micron 5300 MAX 1.92 TB1.92 TB540 / 520 MB/s95K / 70K IOPS17,520 TB (5 DWPD)3.0 / 3.9 WMixed-use, 96-layer TLC

Read performance is identical across all four rows — the SATA interface, not the NAND, sets it — so the columns worth comparing are endurance and random write. Note that the 5200 PRO row edges this drive on endurance while sitting two generations back, and that the MAX row is a separate mixed-use product rather than a newer revision. Figures are datasheet values at 128 KB sequential or 4 KB random, steady state; power is reported as a single typical figure where the vendor publishes one and as read/write maxima where it publishes two.

How a 1.92 TB unit is checked here

Large-capacity drives arrive in two shapes, sealed and pulled, and the bench treats them differently at the start and identically at the end. A sealed unit is logged by its outer label and left sealed until it ships. A pull is identified to firmware level, written across its full span once, read back, and its SMART counters are captured before and after; the power-loss capacitors are discharged and re-measured instead of being assumed serviceable. Both paths finish with a capacity check against the model string, because relabelled drives are the one failure mode no SMART attribute reports.

Warranty, lead time and purchasing

The one-year cover we give applies to either condition, sealed or pulled, and it stands behind the drive itself rather than the server it came out of. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued when the parcel leaves. Minimum order is two pieces, capacities within one series can be combined on a single order, and a quote is returned the same working day once part number, condition and quantity are clear.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View