1.92 TB 2.5-inch SATA SSD, ordering code MTFDDAK1T9TDS-1AW1ZABYY
| Capacity | 1.92 TB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 1.5 |
| TBW | 5,256 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 95K IOPS |
| Random Write IOPS | 30K IOPS |
| Power | 3.8 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5300 PRO 1.92 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK1T9TDS, ordering code MTFDDAK1T9TDS-1AW1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 95K random read and 30K random write IOPS at 4 KB, 5,256 TBW — 1.5 drive writes a day for five years — on Micron 96-layer 3D TLC, with capacitor-backed power-loss protection and TCG Enterprise encryption. Available as new sealed drives or as tested pulls, both with a 1-year warranty from us.
This is the first capacity in the line meant for a working VM host rather than a boot device. Read performance does not change from 960 GB — 540 MB/s and 95K IOPS are the same numbers — so the extra capacity buys room rather than speed: 2.88 TB of write headroom a day, enough for a hypervisor, its logs, swap and a set of guest images on one device.
The step up from 960 GB makes the wear calculation comfortable rather than tight. At 1.5 drive writes a day this part absorbs 2.88 TB of writes daily for five years, and the daily figure is exactly 1.5 times its own capacity, so a host that writes at a steady two terabytes a day sits inside the rating instead of on the edge of it. Random write eases once more, from 35K at 960 GB to 30K here, and holds that value up through 3.84 TB; read IOPS stays flat at 95K across the same span.
| Product family | Micron 5300 PRO (SATA NAND Flash SSD, read-intensive data centre) |
|---|---|
| PN | MTFDDAK1T9TDS (catalogue code) |
| Ordering code | MTFDDAK1T9TDS-1AW1ZABYY |
| Capacity | 1.92 TB (1,920 GB unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 96-layer 3D TLC |
| Sequential read | 540 MB/s (128 KB, steady state) |
| Sequential write | 520 MB/s (128 KB, steady state) |
| Random 4K read | 95K IOPS (steady state) |
| Random 4K write | 30K IOPS (steady state) |
| Endurance (TBW) | 5,256 TB |
| Endurance (DWPD) | 1.5 drive writes per day for five years |
| Quality of service | 175 µs read / 300 µs write |
| Power (read / write) | 3.0 / 3.8 W typical; 1.5 W idle |
| DRAM cache | Yes, LPDDR4, power-loss protected |
| Power-loss protection | Yes, capacitor-backed for data in flight |
| Encryption | AES 256-bit, TCG Enterprise configurability |
| MTTF | 3 million device hours |
| Weight | < 70 g |
5,256 TB across a five-year life is 2.88 TB written every day. Against the 5200 ECO at this size, rated 3,500 TB, that is half again as much — 1,756 TB more, or roughly 610 further days at that daily rate. One comparison runs the other way, and it is worth stating plainly: the 5200 PRO quotes 5,950 TB here at 1.7 DWPD, so where endurance is the only criterion the older drive is not behind. What the 5300 PRO contributes at this capacity is 96-layer NAND and the same sequential and read figures, not a larger write budget.
That does not make the newer part the wrong buy. A host whose writes are dominated by logs and image pulls lands far below 2.88 TB a day, and at that level both ratings are academic; the drive gets replaced when the platform is refreshed, not when a counter runs out.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK1T9TDS | Catalogue code (bare PN) | new or used | Enquire |
| MTFDDAK1T9TDS-1AW1ZABYY | Standard (non-SED) | new or used | Enquire |
| MTFDDAK1T9TDS-1AW15ABYY | TCG Opal 2 SED | new or used | Enquire |
| MTFDDAK1T9TDS-1AW16ABYY | TCG Enterprise SED | new or used | Enquire |
Four codes cover this capacity. Z in the trailing block is the plain drive, 5 is TCG Opal 2 and 6 is TCG Enterprise, so the code on the order decides the security build. All four can be quoted as new or as a tested pull.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5200 ECO 1.92 TB | 1.92 TB | 540 / 520 MB/s | 95K / 22K IOPS | 3,500 TB (1 DWPD) | 3.6 W | Read-intensive, 64-layer TLC |
| Micron 5300 PRO 1.92 TB | 1.92 TB | 540 / 520 MB/s | 95K / 30K IOPS | 5,256 TB (1.5 DWPD) | 3.0 / 3.8 W | Read-intensive, 96-layer TLC |
| Micron 5200 PRO 1.92 TB | 1.92 TB | 540 / 520 MB/s | 95K / 32K IOPS | 5,950 TB (1.7 DWPD) | 3.6 W | Read-intensive, 64-layer TLC |
| Micron 5200 MAX 1.92 TB | 1.92 TB | 540 / 520 MB/s | 95K / 70K IOPS | 17,520 TB (5 DWPD) | 3.6 W | Mixed-use, 64-layer TLC |
All four rows are Micron datasheet numbers at 128 KB sequential and 4 KB random under steady state, and the three 5200 rows are lifted from pages already on this site. The endurance column is not a ranking by age: at 1.92 TB the tiers overlap, and the 5200 PRO sits above this drive on TBW while the 5300 PRO sits above it on NAND generation.
Every 1.92 TB unit gets a full bench cycle rather than a spot check: model and firmware read at power-up, the entire span written and read back, SMART logged before and after, capacitors discharged and re-tested. On a capacity this size the write pass takes hours rather than minutes, which is the point — a drive that throttles badly under sustained write shows up here. Sealed units ship sealed; pulls are wiped and verified before dispatch.
New and used drives carry the same one-year cover from us. Stock sits in our own warehouse and normally dispatches within three to seven working days, with tracking issued at that point. Minimum order is two pieces, capacities from one series combine on a single order, and a quote is answered the same working day once part number, condition and quantity are clear.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV