1.92 TB 2.5-inch SATA SSD, ordering code MTFDDAK1T9TDT-1AW1ZABYY
| Capacity | 1.92 TB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 5 |
| TBW | 17,520 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 95K IOPS |
| Random Write IOPS | 70K IOPS |
| Power | 3.9 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5300 MAX 1.92 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK1T9TDT, ordering code MTFDDAK1T9TDT-1AW1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 95K random read and 70K random write IOPS at 4 KB, 17,520 TBW — 5 drive writes a day for five years — on Micron 96-layer 3D TLC, with capacitor-backed power-loss protection and TCG Enterprise encryption. Held as sealed new drives or tested pulls, both with a 1-year warranty from us.
At 1.92 TB the MAX recipe trades a little write IOPS for a lot of endurance: random write steps back to 70K from the 75K peak at 960 GB, while the write budget doubles to 17,520 TB. That is 9.6 TB of writes a day, and it puts this drive in the small group of SATA parts that can absorb a sustained write stream for five years without being replaced early.
Three capacities sit above and below this one and each moves a different number. Going up from 960 GB buys 8,760 TB of extra endurance but gives back 5K of random write; going down from 3.84 TB buys 10K of random write but halves the endurance. Endurance here is 17,520 TB, the highest in the MAX range apart from the 3.84 TB part, and the DWPD rating holds at 5 rather than tapering the way the PRO line does at the top of its range.
| Product family | Micron 5300 MAX (SATA NAND Flash SSD, mixed-use data centre) |
|---|---|
| PN | MTFDDAK1T9TDT (catalogue code) |
| Ordering code | MTFDDAK1T9TDT-1AW1ZABYY |
| Capacity | 1.92 TB (1,920 GB unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 96-layer 3D TLC |
| Sequential read | 540 MB/s (128 KB, steady state) |
| Sequential write | 520 MB/s (128 KB, steady state) |
| Random 4K read | 95K IOPS (steady state) |
| Random 4K write | 70K IOPS (steady state) |
| Endurance (TBW) | 17,520 TB |
| Endurance (DWPD) | 5 drive writes per day for five years |
| Quality of service | 175-200 µs read / 100-650 µs write |
| Power (read / write) | 3.0 W read / 3.9 W write maximum; 1.5 W idle |
| DRAM cache | Yes, LPDDR4, power-loss protected |
| Power-loss protection | Yes, capacitor-backed for data in flight |
| Encryption | AES 256-bit, TCG Enterprise configurability |
| MTTF | 3 million device hours |
| Weight | < 70 g |
17,520 TB over 1,825 days works out to 9.6 TB written every day, five times the drive's own capacity. Against the 5300 PRO at the same size, rated 5,256 TB, it is 3.3 times the budget; against the 5100 MAX, 17,600 TB, and the 5200 MAX, 17,520 TB, it is level to within half a percent. The endurance column therefore does not decide between the MAX generations — the write IOPS and the NAND generation do.
The rating assumes 100 percent random 4K writes. A drive in this role usually sits behind a database or a log aggregator, which mixes sequential and random traffic, so real deployments tend to run below the ceiling rather than against it.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK1T9TDT | Catalogue code (bare PN) | new or used | Enquire |
| MTFDDAK1T9TDT-1AW1ZABYY | Standard (non-SED) | new or used | Enquire |
| MTFDDAK1T9TDT-1AW15ABYY | TCG Opal 2 SED | new or used | Enquire |
| MTFDDAK1T9TDT-1AW16ABYY | TCG Enterprise SED | new or used | Enquire |
Four ordering codes exist for this capacity: the bare catalogue number, the plain -1AW1ZABYY build, -1AW15ABYY for TCG Opal 2 and -1AW16ABYY for TCG Enterprise. All four are available new or as a tested pull and can be mixed in one order.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5300 PRO 1.92 TB | 1.92 TB | 540 / 520 MB/s | 95K / 30K IOPS | 5,256 TB (1.5 DWPD) | 3.0 / 3.8 W | Read-intensive, 96-layer TLC |
| Micron 5100 MAX 1.92 TB | 1.92 TB | 540 / 520 MB/s | 93K / 66K IOPS | 17,600 TB (5 DWPD) | 5.5 W | Mixed-use, 32-layer TLC |
| Micron 5200 MAX 1.92 TB | 1.92 TB | 540 / 520 MB/s | 95K / 70K IOPS | 17,520 TB (5 DWPD) | 3.6 W | Mixed-use, 64-layer TLC |
| Micron 5300 MAX 1.92 TB | 1.92 TB | 540 / 520 MB/s | 95K / 70K IOPS | 17,520 TB (5 DWPD) | 3.0 / 3.9 W | Mixed-use, 96-layer TLC |
Values in the table are Micron datasheet figures, 128 KB sequential and 4 KB random, steady state, with the three older rows taken from pages already on this site. The power column is not uniform: 5100 and 5200 entries give one typical number, the 5300 entry gives separate read and write maxima, so read it as an envelope.
A 1.92 TB unit takes hours to write end to end, which is why the bench pass here is a sustained-write test rather than a short check: the whole span is written and read back, SMART is captured before and after, and the capacitors are discharged and re-tested. Throttling under a long write is the failure this catches, and it is the one that matters in a mixed-use role. Sealed units leave sealed; pulls are wiped and verified before dispatch.
New and used both come with one year of cover from us. Stock sits in our own warehouse and normally dispatches within three to seven working days, with tracking issued at that point. Minimum order is two pieces, capacities from the same series combine on one order, and a quote is answered the same working day once part number, condition and quantity are clear.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV