16 GB DDR4-2133 PC4-17000 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; nine ordering codes from M393A2K43BB1-CPB through the CPBQ tail
| Capacity | 16 GB |
|---|---|
| Memory Type | DDR4 |
| Speed | 2133 MT/s |
| Form Factor | RDIMM |
| Rank | 2Rx8 |
| ECC | ECC |
| Voltage | 1.2 V |
| Module Height | Standard |
| Condition | New · Used |
Samsung 16 GB DDR4-2133 ECC registered RDIMM at standard height, two ranks of nine x8 devices on a 288-pin board at 1.2 V. PC4-17000 at CAS latency 15, 14.06 ns at the 1,066 MHz clock, and 17.1 GB/s peak per 64-bit channel.
2,133 is the floor of the DDR4 range: the speed every board of the generation supports, the speed a mixed estate eventually settles to, and the one clock at which no population rule is likely to cost anything. That makes this the safest sixteen-gigabyte module to standardise on, and the one where the x8 shape's rank penalty is least visible — four ranks per channel at this clock is inside every published table rather than at the edge of one.
Eight build codes are stocked against it and the family code they sit under makes nine lines, all collected in the table at the foot of the page.
| Part number | M393A2K43BB1-CPB, with the nine ordering codes listed under Ordering codes (catalogue code M393A2K43BB1) |
|---|---|
| Capacity | 16 GB per module, single module |
| Organisation | 2Rx8 — two ranks of nine x8 devices, eighteen 8 Gb packages in total, 144 Gb of silicon delivering 128 Gb of data plus the eight check bits that travel with every 64-bit transfer; 2G x 72 at module level |
| Speed | DDR4-2133, PC4-17000, 2,133 MT/s, 17.1 GB/s peak per 64-bit channel |
| Timings | CL15 at 1,066 MHz, 14.06 ns; JEDEC 2133P bin |
| Voltage | 1.2 V nominal |
| Form factor | 288-pin RDIMM at standard height, 31.25 mm, bare PCB with no heatspreader |
| Register | On-module register buffers the command and address bus, so the board has to accept registered memory |
| Error handling | ECC across the 64-bit data path. x8 devices correct at symbol level; retiring a whole package needs x4 granularity and a controller that supports it |
| Manufacture | Samsung; assembly site and date code vary by production run and are printed on the module rather than fixed by the part number |
| Condition | New and tested pulls, both stocked |
Two characters decide the shape and two more decide the clock. The rest of the line is capacity, a revision letter and a build suffix, and only the suffix varies between the modules on this page.
| Printed as | Means | Why it matters at purchase |
|---|---|---|
| M393 | Standard-height registered module | The 31.25 mm board; the low-profile build of this capacity carries M392 |
| 2K | Sixteen-gigabyte class | Capacity, before rank and width narrow it into a shape |
| 43 | x8 device width | Nine packages to a rank rather than eighteen, and no whole-device retirement |
| 2Rx8 | Two ranks of nine devices | Two ranks against a channel budget; at two modules per channel that is four |
| PC4-17000P | DDR4-2133, bin P, which is CL15 | The letter states the timing grade; a listing that quotes only the clock leaves latency open |
| -R | Registered, not unbuffered | A different electrical interface from an unbuffered module of the same capacity, and it will not train in that slot |
| BB1 | Die and raw-card revision | Records which silicon generation and raw card built the assembly; it constrains nothing ahead of it |
| CPB | The 2,133 speed block | Neighbouring blocks in this family are other clocks, so the block letter needs checking |
| CPB0 … CPBQ | Ordering suffix, one to three characters | What the purchase order quotes; lengths vary inside this block, unlike the 2,400 one |
| YYWW | Date code, year and week | The only service history a pull carries, and the first field to read when judging remaining life |
Every DDR4 server board supports 2,133, including the ones that never run anything slower than 2,666 in practice. That gives this module a property the faster grades do not have: it trains everywhere without asking a question about population, and a machine built from it reports the speed on the label regardless of how many slots are filled.
It is also where a mixed estate converges. Put a 2,133 module in a channel with faster parts and the channel takes the lower figure, which costs the faster modules their premium but never costs anyone a failure. Where the estate is heterogeneous and the spares pool is shared, standardising on the lowest common grade is often the cheaper operational decision, and the money saved against faster stock buys capacity instead.
Two things, and neither is the clock. The first is bandwidth: 17.1 GB/s per channel against 19.2 at the next grade, a little over twelve per cent, with absolute latency almost identical at 14.06 ns against 14.17. For streaming work that gap is real but rarely the constraint; for work that is already short of memory bandwidth, it is the reason to buy one bin higher and accept the population rules that come with it.
The second is error granularity, which no clock recovers. x8 devices correct symbol errors but cannot be retired as a unit, so a failing package takes its slice of the data path with it. x4 devices — the 1Rx4 or 2Rx4 builds of this capacity — allow device retirement, which is what chipkill and advanced ECC actually name. Where the platform requirement lists that feature, this module does not satisfy it.
Sixteen gigabytes per slot is the density that made the DDR4 generation affordable. Sixteen slots at one module each is 256 GB; filled two per channel it is the same 256 GB with four ranks per channel, and at this clock that population is inside the table rather than at its edge. The cost per gigabyte of this grade is the lowest in the sixteen-gigabyte bracket, which is why it is the module that gets bought by the pallet.
The comparison that matters is with the single-rank sixteen-gigabyte part at the same clock. Same eighteen packages, same capacity, one rank instead of two, chipkill intact, and a price usually within a few percent. Buy this one when it is materially cheaper or when the installed base already looks like it; buy the other when the machine has to be specified rather than filled.
The module caps the channel at its own rating, and these three are the cases a buyer is most likely to meet:
None of the three needs setting changed, and none is harmed by the gap in rating. The part number describes the module; what the machine reports is a firmware decision.
Nine codes carry this module: the base M393A2K43BB1-CPB and eight suffixed builds. The family code fixes height class, density, device width and revision, CPB fixes the 2,133 speed block, and the last two or three characters name the build. Tail length varies from one character to three in this block, which is the opposite of the 2,400 block where every tail is two, so a check that assumes a fixed width will pass here and fail there.
The eight tails are also the same set that appears on other capacities at this clock, including a four-gigabyte module and a low-profile sixteen-gigabyte one. The suffix names a build within a family; it says nothing about how much memory is attached to it.
| Code | Type | Build tail | Condition | Quote |
|---|---|---|---|---|
| M393A2K43BB1 | Catalogue code | Family code without a speed block; the P build listed here is the PC4-17000 / 2,133 MT/s one | New / used | Enquire |
| M393A2K43BB1-CPB | Ordering code | Base code, no suffix appended | New / used | Enquire |
| M393A2K43BB1-CPB0 | Ordering code | 0 | New / used | Enquire |
| M393A2K43BB1-CPB00 | Ordering code | 00 | New / used | Enquire |
| M393A2K43BB1-CPB0Q | Ordering code | 0Q | New / used | Enquire |
| M393A2K43BB1-CPB0QS | Ordering code | 0QS | New / used | Enquire |
| M393A2K43BB1-CPB20 | Ordering code | 20 | New / used | Enquire |
| M393A2K43BB1-CPB2Q | Ordering code | 2Q | New / used | Enquire |
| M393A2K43BB1-CPBQ | Ordering code | Q | New / used | Enquire |
Every module carries one year of cover from dispatch, new stock and tested pull alike, logged against the batch and the ordering code so a claim does not need the invoice. Pulls are screened in matched sets before packing and the record ships inside the box. Shelf stock leaves in three to seven working days with tracking, and the smallest order accepted is two modules.
No figure appears on the page because every line is quoted per order: two conditions, nine lines and a per-piece price that tracks quantity make a printed number misleading. Send the code, the quantity, the condition and the platform, and the reply comes back the same working day.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
16 GB DDR4-2933 PC4-23400 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; six ordering codes under M393A2K43CB2-CVF with BY, CO, BQ, C0 and GQ tails
16 GB DDR4-2400 PC4-19200 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; eighteen ordering codes under the M393A2K43BB1 and M393A2K43CB1 revisions
16 GB DDR4-2666 PC4-21300 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; six ordering codes under M393A2K43BB1-CTD with 6Q, 6Y, 7Q, 7Y and 8Q tails
16 GB DDR4-3200 PC4-25600 ECC registered RDIMM, 1Rx4 on eighteen 8 Gb x4 packages, 1.2 V, 288-pin; thirty-three ordering codes under the M393A2K40DB2, M393A2K40DB3 and M393A2K40EB3 revisions