16 GB DDR4-3200 PC4-25600 ECC registered RDIMM, 1Rx4 on eighteen 8 Gb x4 packages, 1.2 V, 288-pin; thirty-three ordering codes under the M393A2K40DB2, M393A2K40DB3 and M393A2K40EB3 revisions
| Capacity | 16 GB |
|---|---|
| Memory Type | DDR4 |
| Speed | 3200 MT/s |
| Form Factor | RDIMM |
| Rank | 1Rx4 |
| ECC | ECC |
| Voltage | 1.2 V |
| Module Height | Standard |
| Condition | New · Used |
Samsung 16 GB DDR4-3200 ECC registered RDIMM at standard height, one rank of eighteen x4 devices on a 288-pin board at 1.2 V. PC4-25600 at CAS latency 22, 13.75 ns at the 1,600 MHz clock, and 25.6 GB/s peak per 64-bit channel.
3,200 is the last bin DDR4 reached, and the only one where the module usually sits above the platform rather than below it. The second Scalable generation stops at 2,933, the third generation and the EPYC 7002 and 7003 lines rate 3,200, and anything with DDR5 slots cannot take this part at all. A module at this grade is therefore either an exact match for a narrow band of machines or a part that spends its service life reporting a lower number.
Three die revisions carry it — M393A2K40DB2, M393A2K40DB3 and M393A2K40EB3 — and all three were issued under the same eleven ordering codes. Thirty-three codes in one table at the foot of the page, one set of specifications above them.
| Part number | M393A2K40DB2-CWE, M393A2K40DB3-CWE and M393A2K40EB3-CWE — three revisions of one module, with the thirty-three ordering codes listed under Ordering codes |
|---|---|
| Capacity | 16 GB per module, single module |
| Organisation | 1Rx4 — one rank of eighteen x4 devices at 8 Gb each, eighteen packages carrying 128 Gb of data plus the eight check bits that ride with every 64-bit transfer; 2G x 72 at module level |
| Speed | DDR4-3200, PC4-25600, 3,200 MT/s, 25.6 GB/s peak per 64-bit channel |
| Timings | CL22 at 1,600 MHz, 13.75 ns; JEDEC 3200 bin |
| Voltage | 1.2 V nominal |
| Form factor | 288-pin RDIMM at standard height, 31.25 mm, bare PCB with no heatspreader |
| Register | On-module register buffers the command and address bus, so the board has to accept registered memory |
| Error handling | ECC across the 64-bit data path with x4 granularity, which is what allows a failing device to be retired rather than tolerated |
| Manufacture | Samsung; assembly site and date code vary by production run and are printed on the module rather than fixed by the part number |
| Condition | New and tested pulls, both stocked |
The part number settles compatibility and the label records the batch. The two are read as one string often enough that capacity gets confused with rank, so they are worth keeping apart deliberately.
| Printed as | Means | Why it matters at purchase |
|---|---|---|
| M393 | Standard-height registered module | The 31.25 mm board; the low-profile build of this capacity carries M392 instead |
| 2K | Sixteen-gigabyte class on 8 Gb devices | Fixes capacity and device density together, which is why eighteen packages reach sixteen gigabytes |
| 40 | x4 device width | The width that gives chipkill granularity, and the reason a rank here is eighteen devices rather than nine |
| 1Rx4 as printed on most listings | Single rank, x4 devices | One rank against a channel budget, which is what makes two modules per channel viable at this clock |
| PC4-25600 | DDR4-3200, 25.6 GB/s per channel | The terminal DDR4 bin, and the only one most DDR4 platforms cannot reach |
| -R | Registered, not unbuffered | A different electrical interface from an unbuffered module of the same capacity, and it will not train in that slot |
| DB2 / DB3 / EB3 | Successive die revisions of one design | Records which silicon generation built the assembly; all three carry the same organisation, clock and voltage |
| CWE | The 3,200 speed block | Sits next to the 2,933 block in the same family; the letters have to be checked, never inferred |
| B0 / CO / GQ … | Ordering suffix, two characters each | What the purchase order quotes; one of them mixes a letter and a digit that look alike |
| YYWW | Date code, year and week | The only service history a pull carries, and the first field to read when judging remaining life |
DDR4 finished its run at 3,200, which makes this grade the end of a ladder rather than a step on it. There is nothing faster in the same socket, and the platforms that can use it are the last DDR4 generation rather than the first. That inverts the usual buying logic: on a 2,666 machine a faster module is wasted because the platform never asks for more, while on a 3,200 machine a slower module caps the channel and the platform's capability is wasted instead.
So the question is not whether 3,200 is better. It is which side of that line the machine sits on. For a third-generation Scalable host, or an EPYC 7002 or 7003 box, this is the grade that lets the channel run at the speed the processor was specified for. For a second-generation host, the same module runs at 2,933 and the extra step is paid for and not collected.
Rank count decides the clock at this speed more sharply than at any lower one. Two single-rank modules are two ranks in the channel, which most boards accept at label speed; the same two slots filled with 2Rx4 parts are four ranks, and there the controller generally settles at 2,933 or 2,666 without reporting anything. This module exists in the catalogue for that reason: it is the shape that keeps a fully populated channel at 3,200 rather than the shape that packs the most silicon in a slot.
Capacity follows the same arithmetic. Eight channels at two modules is 256 GB at two ranks per channel; twelve channels is 384 GB at the same rank count. Reaching those figures with dual-rank modules is possible and often cheaper per gigabyte, but the clock is the thing being traded away, and at 3,200 the trade is visible in every benchmark that reads memory.
Samsung lists the DB2 revision as end of life on its own product page, which is expected for a module at the end of a generation. What matters practically is the age profile: 3,200 DDR4 shipped while DDR5 was already arriving, so the fleets these modules come out of are younger than the ones that produced 2,133 and 2,400 stock. On a pulled module the date code in YYWW is therefore worth more attention than the revision letter, because it is the one field that separates a two-year-old pull from a five-year-old one.
New stock also exists at this grade, which is unusual at the bottom of the ladder and normal at the top; both conditions are held here and both carry the same cover.
Two catalogue pages mark the native cases and one marks the derate:
None of the three needs configuring, and none is harmed by the rating difference. The module states its own ceiling; the platform decides what part of it is used.
Thirty-three codes carry this module, eleven under each revision, and all three families share the same tail set exactly. The family code fixes height class, density, device width and revision, CWE fixes the 3,200 speed block, and the last two characters name the build. The first character of the tail runs B, C and G; the second runs 0, Q and Y, and the combination is not a full set, so the tail has to be read rather than derived.
Because the three families were issued with identical tails, a code transposes between them by changing only the revision letters — DB2, DB3 or EB3, same eleven builds. That is a property of this group, not a rule of the family: the 2,666 catalogue splits the other way, where each revision carries its own tail set and DB2 holds only a single suffix. So the revision is the only thing to confirm on a substitution here, while on the slower grade the tail has to be checked as well.
One pair deserves naming. CWEC0 and CWECO differ only in that the last character of the first is a zero and the last character of the second is the letter O. Both are real codes in all three revisions, they name different builds, and a transcription that substitutes one for the other will produce an order that looks correct and is not.
| Code | Build | Build tail | Condition | Quote |
|---|---|---|---|---|
| M393A2K40DB2 | DB2 catalogue | Family code without a speed block; the DB2 build listed here is the PC4-25600 / 3,200 MT/s one | New / used | Enquire |
| M393A2K40DB2-CWE | DB2 | Base code, no suffix appended | New / used | Enquire |
| M393A2K40DB2-CWEB0 | DB2 | B0 — digit zero | New / used | Enquire |
| M393A2K40DB2-CWEBQ | DB2 | BQ | New / used | Enquire |
| M393A2K40DB2-CWEBY | DB2 | BY | New / used | Enquire |
| M393A2K40DB2-CWEC0 | DB2 | C0 — digit zero | New / used | Enquire |
| M393A2K40DB2-CWECO | DB2 | CO — letter O | New / used | Enquire |
| M393A2K40DB2-CWECQ | DB2 | CQ | New / used | Enquire |
| M393A2K40DB2-CWECY | DB2 | CY | New / used | Enquire |
| M393A2K40DB2-CWEGQ | DB2 | GQ | New / used | Enquire |
| M393A2K40DB2-CWEGY | DB2 | GY | New / used | Enquire |
| M393A2K40DB2-CWEQB | DB2 | QB | New / used | Enquire |
| M393A2K40DB3 | DB3 catalogue | Family code without a speed block; the DB3 build listed here is the PC4-25600 / 3,200 MT/s one | New / used | Enquire |
| M393A2K40DB3-CWE | DB3 | Base code, no suffix appended | New / used | Enquire |
| M393A2K40DB3-CWEB0 | DB3 | B0 — digit zero | New / used | Enquire |
| M393A2K40DB3-CWEBQ | DB3 | BQ | New / used | Enquire |
| M393A2K40DB3-CWEBY | DB3 | BY | New / used | Enquire |
| M393A2K40DB3-CWEC0 | DB3 | C0 — digit zero | New / used | Enquire |
| M393A2K40DB3-CWECO | DB3 | CO — letter O | New / used | Enquire |
| M393A2K40DB3-CWECQ | DB3 | CQ | New / used | Enquire |
| M393A2K40DB3-CWECY | DB3 | CY | New / used | Enquire |
| M393A2K40DB3-CWEGQ | DB3 | GQ | New / used | Enquire |
| M393A2K40DB3-CWEGY | DB3 | GY | New / used | Enquire |
| M393A2K40DB3-CWEQB | DB3 | QB | New / used | Enquire |
| M393A2K40EB3 | EB3 catalogue | Family code without a speed block; the EB3 build listed here is the PC4-25600 / 3,200 MT/s one | New / used | Enquire |
| M393A2K40EB3-CWE | EB3 | Base code, no suffix appended | New / used | Enquire |
| M393A2K40EB3-CWEB0 | EB3 | B0 — digit zero | New / used | Enquire |
| M393A2K40EB3-CWEBQ | EB3 | BQ | New / used | Enquire |
| M393A2K40EB3-CWEBY | EB3 | BY | New / used | Enquire |
| M393A2K40EB3-CWEC0 | EB3 | C0 — digit zero | New / used | Enquire |
| M393A2K40EB3-CWECO | EB3 | CO — letter O | New / used | Enquire |
| M393A2K40EB3-CWECQ | EB3 | CQ | New / used | Enquire |
| M393A2K40EB3-CWECY | EB3 | CY | New / used | Enquire |
| M393A2K40EB3-CWEGQ | EB3 | GQ | New / used | Enquire |
| M393A2K40EB3-CWEGY | EB3 | GY | New / used | Enquire |
| M393A2K40EB3-CWEQB | EB3 | QB | New / used | Enquire |
Every module is covered for one year from the day it is dispatched, whether it leaves as new stock or as a tested pull, and the cover is recorded against the batch and the ordering code so that it does not depend on an invoice being kept. Pulls are screened in matched sets and the screening record is packed with them. Shelf stock ships in three to seven working days with tracking, and the smallest order accepted is two modules.
Prices are quoted rather than printed: two conditions, thirty-three codes and a per-piece figure that moves with quantity make a page number unreliable. Send the code, the quantity, the condition and the platform, and the answer comes back the same working day.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
16 GB DDR4-2933 PC4-23400 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; six ordering codes under M393A2K43CB2-CVF with BY, CO, BQ, C0 and GQ tails
16 GB DDR4-2400 PC4-19200 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; eighteen ordering codes under the M393A2K43BB1 and M393A2K43CB1 revisions
16 GB DDR4-2133 PC4-17000 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; nine ordering codes from M393A2K43BB1-CPB through the CPBQ tail
16 GB DDR4-2666 PC4-21300 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; six ordering codes under M393A2K43BB1-CTD with 6Q, 6Y, 7Q, 7Y and 8Q tails