960 GB 2.5-inch SATA SSD, ordering code MTFDDAK960TDT-1AW1ZABYY
| Capacity | 960 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 5 |
| TBW | 8,760 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 95K IOPS |
| Random Write IOPS | 75K IOPS |
| Power | 3.9 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5300 MAX 960 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK960TDT, ordering code MTFDDAK960TDT-1AW1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 95K random read and 75K random write IOPS at 4 KB, 8,760 TBW — 5 drive writes a day for five years — on Micron 96-layer 3D TLC, with power-loss protection and TCG Enterprise encryption. Supplied sealed as new, or as tested pulls, with a 1-year warranty from us.
Of the five capacities in this family, 960 GB is where the MAX tune is at its sharpest: 75K random write is the highest figure Micron quotes anywhere in the 5300 line, and the endurance budget reaches 8,760 TB without the DWPD compromise that sets in at 3.84 TB.
Two numbers move in opposite directions as you walk up the MAX capacities, and 960 GB is where both are close to their best. Random write climbs from 60K at 240 and 480 GB to 75K here, then falls away to 70K at 1.92 TB and 34K at 3.84 TB. Endurance follows capacity rather than IOPS: 4,380 TB below this point, 8,760 here, 17,520 TB at 1.92 TB. If a host needs both write IOPS and a long write budget in one SATA slot, this is the row to pick.
| Product family | Micron 5300 MAX (SATA NAND Flash SSD, mixed-use data centre) |
|---|---|
| PN | MTFDDAK960TDT (catalogue code) |
| Ordering code | MTFDDAK960TDT-1AW1ZABYY |
| Capacity | 960 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 96-layer 3D TLC |
| Sequential read | 540 MB/s (128 KB, steady state) |
| Sequential write | 520 MB/s (128 KB, steady state) |
| Random 4K read | 95K IOPS (steady state) |
| Random 4K write | 75K IOPS (steady state) |
| Endurance (TBW) | 8,760 TB |
| Endurance (DWPD) | 5 drive writes per day for five years |
| Quality of service | 175-200 µs read / 100-650 µs write |
| Power (read / write) | 3.0 W read / 3.9 W write maximum; 1.5 W idle |
| Label rating | 5 V, 1.7 A as printed on the drive label |
| DRAM cache | Yes, LPDDR4, power-loss protected |
| Power-loss protection | Yes, capacitor-backed for data in flight |
| Encryption | AES 256-bit, TCG Enterprise configurability |
| MTTF | 3 million device hours |
| Weight | < 70 g |
8,760 TB over 1,825 days is 4.8 TB written every day, five times the drive's own capacity per day and 3.3 times what the 5300 PRO allows at this size. Against the older MAX parts the figure is level: 8,760 TB for the 5200 MAX, 8,800 TB for the 5100 MAX. The three are the same promise on endurance, so the decision moves to the other columns — and there the newer drive matches the 5200 MAX on random write at 75K while the 5100 MAX trails at 74K on older, hungrier NAND.
What has actually improved between generations is not the rating but the cost of reaching it: the same endurance and IOPS arrive on 96-layer NAND at 3.0 W read and 3.9 W write rather than the 5 W the 5100 MAX needed.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK960TDT | Catalogue code (bare PN) | new or used | Enquire |
| MTFDDAK960TDT-1AW1ZABYY | Standard (non-SED) | new or used | Enquire |
| MTFDDAK960TDT-1AW15ABYY | TCG Opal 2 SED | new or used | Enquire |
| MTFDDAK960TDT-1AW16ABYY | TCG Enterprise SED | new or used | Enquire |
Four codes cover this capacity and the trailing block settles the security build: Z is the plain drive, 5 is TCG Opal 2, 6 is TCG Enterprise. The label on the sealed unit pictured reads -1AW1ZABYY, which is the non-SED build, and 5 V, 1.7 A. All four codes can be quoted new or as a tested pull.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5300 PRO 960 GB | 960 GB | 540 / 520 MB/s | 95K / 35K IOPS | 2,628 TB (1.5 DWPD) | 2.8 / 3.4 W | Read-intensive, 96-layer TLC |
| Micron 5100 MAX 960 GB | 960 GB | 540 / 520 MB/s | 93K / 74K IOPS | 8,800 TB (5 DWPD) | 5 W | Mixed-use, 32-layer TLC |
| Micron 5200 MAX 960 GB | 960 GB | 540 / 520 MB/s | 95K / 75K IOPS | 8,760 TB (5 DWPD) | 3.6 W | Mixed-use, 64-layer TLC |
| Micron 5300 MAX 960 GB | 960 GB | 540 / 520 MB/s | 95K / 75K IOPS | 8,760 TB (5 DWPD) | 3.0 / 3.9 W | Mixed-use, 96-layer TLC |
The three earlier rows are read out of pages already catalogued on this site, and every figure in the table is a Micron datasheet number taken at 128 KB sequential or 4 KB random under steady state. Power is reported two ways across the rows — a single typical figure for the 5100 and 5200 entries, read and write maxima for the 5300 — so treat that column as an envelope rather than a like-for-like measurement.
A 960 GB mixed-use unit is put through a full bench cycle: identification at power-up, whole-span write and read-back, SMART captured at both ends, capacitors discharged and re-tested. Because this capacity is usually deployed where writes are continuous, the pass also checks that throughput survives after the fast-write cache is used up, which is the number a steady-state workload actually sees. Sealed drives leave sealed; pulls are wiped and verified before dispatch.
Both conditions carry a one-year warranty from us. Stock sits in our own warehouse and normally dispatches within three to seven working days, with tracking issued at that point. Minimum order is two pieces, capacities from one series combine on an order, and a quote is answered the same working day once part number, condition and quantity are clear.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV