960 GB 2.5-inch SATA SSD, ordering code MTFDDAK960TDD-1AT1ZABYY
| Capacity | 960 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 1.3 |
| TBW | 2,270 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 95K IOPS |
| Random Write IOPS | 32K IOPS |
| Power | 3.6 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5200 PRO 960 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK960TDD, ordering code MTFDDAK960TDD-1AT1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 95K random read and 32K random write IOPS at 4 KB, 2,270 TBW — 1.3 drive writes a day for five years — on Micron 64-layer 3D TLC, with capacitor-backed power-loss protection and TCG Enterprise encryption. Stocked as new sealed drives or as tested pulls, both with a 1-year warranty from us.
At 960 GB the PRO tier is the cheapest way into the 5200 generation without giving up write endurance: the same 540/520 MB/s as the larger capacities, the same 95K read IOPS, and a write budget of 2,270 TB that suits a boot-and-application volume rather than a cold archive.
It is the smallest capacity Micron built in the 5200 PRO line, and the only one where the write budget is under 3 PB. Below it the 5200 ECO takes over; above it you pay for capacity you may not need. If the workload is a hypervisor boot volume or a small database, this is the size that matches it.
| Product family | Micron 5200 PRO (SATA NAND Flash SSD, read-intensive data centre) |
|---|---|
| PN | MTFDDAK960TDD (catalogue code) |
| Ordering code | MTFDDAK960TDD-1AT1ZABYY |
| Capacity | 960 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 64-layer 3D TLC |
| Sequential read | 540 MB/s (128 KB, steady state) |
| Sequential write | 520 MB/s (128 KB, steady state) |
| Random 4K read | 95K IOPS (steady state) |
| Random 4K write | 32K IOPS (steady state) |
| Endurance (TBW) | 2,270 TB |
| Endurance (DWPD) | 1.3 drive writes per day for five years |
| Quality of service | 200 µs read / 300 µs write |
| Power (read / write) | 3.0 / 3.6 W typical; 1.5 W idle |
| DRAM cache | Yes, LPDDR3/LPDDR4 with power-loss protection |
| Power-loss protection | Yes, capacitor-backed for data in flight |
| Encryption | AES 256-bit, TCG Enterprise configurability |
| MTTF | 3 million device hours |
| Weight | < 70 g |
Endurance is quoted as total bytes written over a five-year service life, so 2,270 TB spread across 1,825 days is roughly 1.2 TB of writing every day, or 1.3 times the drive's own capacity. In practice that is a nightly backup plus a working set that churns: the number to watch is not the average but the peak, which is why a write-heavy volume should be sized on the DWPD rating rather than the terabyte count.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK960TDD | Catalogue code (bare PN) | new or used | Enquire |
| MTFDDAK960TDD-1AT1ZABYY | Standard (non-SED) | new or used | Enquire |
| MTFDDAK960TDD-1AT16ABYY | TCG Enterprise SED | new or used | Enquire |
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5200 PRO 960 GB | 960 GB | 540 / 520 MB/s | 95K / 32K IOPS | 2,270 TB (1.3 DWPD) | 3.0 / 3.6 W | Read-intensive, 1.3-2.5 DWPD |
| Micron 5200 PRO 1.92 TB | 1.92 TB | 540 / 520 MB/s | 95K / 32K IOPS | 5,950 TB (1.7 DWPD) | 3.0 / 3.6 W | Read-intensive, 1.3-2.5 DWPD |
| Micron 5200 PRO 3.84 TB | 3.84 TB | 540 / 520 MB/s | 95K / 24.5K IOPS | 17,600 TB (2.5 DWPD) | 3.0 / 3.6 W | Read-intensive, 1.3-2.5 DWPD |
Figures above come from Micron's datasheet for the 5200 PRO, taken at the same 128 KB steady-state transfer size for every capacity. Keeping one generation in one table keeps the test conditions equal; mixing 5100 or 5300 numbers would not, so they stay out.
Drives are pulled from stock and powered on our bench, where the controller reports back the model and firmware we expect. Each unit is then read and written end to end, SMART counters are logged, and the power-loss capacitors are discharged and rechecked. A drive showing a reallocated sector or a grown defect count never reaches a pallet. Sealed units leave in their original packaging; used units are wiped before they are boxed.
Cover runs for one year from us, whatever is left on Micron's own warranty. Stock sits in our warehouse and normally leaves within three to seven working days, with tracking issued the day it dispatches. Two pieces is the minimum, capacities can be mixed on one order, and quotes come back the same working day. Send the part number with the condition and quantity you want.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV