960 GB 2.5-inch SATA SSD, ordering code MTFDDAK960QDE-2AV1ZABYY
| Capacity | 960 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | QLC |
| Endurance (DWPD) | 0.8 |
| TBW | 1,400 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 130 MB/s |
| Random Read IOPS | 40K IOPS |
| Random Write IOPS | 7K IOPS |
| Power | 3.6 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5210 ION 960 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK960QDE, ordering code MTFDDAK960QDE-2AV1ZABYY. 540 MB/s sequential read, 130 MB/s sequential write, 40K random read and 7K random write IOPS at 4 KB, 1,400 TBW — 0.8 drive writes a day for five years — on Micron 3D QLC, with capacitor-backed power-loss protection and TCG Enterprise encryption. Stocked as new sealed drives or as tested pulls, both with a 1-year warranty from us.
The 960 GB ION is a capacity-tier part: 130 MB/s sequential write and 7K random write IOPS tell you plainly that it is built for reading, while 1,400 TBW at 0.8 drive writes a day is defined by a sequential-write workload. Put it where data lands once and is read many times.
This is a read cache or a warm tier, not a general-purpose system disk: 130 MB/s sequential write is a quarter of what the TLC parts in the same bay deliver. Read at 540 MB/s all day and it behaves like any other enterprise SATA drive.
| Product family | Micron 5210 ION (SATA NAND Flash SSD, QLC read-intensive data centre) |
|---|---|
| PN | MTFDDAK960QDE (catalogue code) |
| Ordering code | MTFDDAK960QDE-2AV1ZABYY |
| Capacity | 960 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 3D QLC |
| Sequential read | 540 MB/s (128 KB, steady state) |
| Sequential write | 130 MB/s (128 KB, steady state) |
| Random 4K read | 40K IOPS (steady state) |
| Random 4K write | 7K IOPS (steady state) |
| Endurance (TBW) | 1,400 TB |
| Endurance (DWPD) | 0.8 drive writes per day for five years |
| Quality of service | 3 ms random read at QD1, 99.999% |
| Power (read / write) | 2.8 / 3.6 W typical; 1.5 W idle |
| DRAM cache | Yes, LPDDR3/LPDDR4 with power-loss protection |
| Power-loss protection | Yes, capacitor-backed for data in flight |
| Encryption | AES 256-bit, TCG Enterprise configurability |
| MTTF | 2 million device hours |
| Weight | < 70 g |
Endurance is quoted as total bytes written over a five-year service life, so 1,400 TB spread across 1,825 days is roughly 0.8 TB of writing every day, or 0.8 times the drive's own capacity. In practice that is a nightly backup plus a working set that churns: the number to watch is not the average but the peak, which is why a write-heavy volume should be sized on the DWPD rating rather than the terabyte count.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK960QDE | Catalogue code (bare PN) | new or used | Enquire |
| MTFDDAK960QDE-2AV1ZABYY | Standard (non-SED) | new or used | Enquire |
| MTFDDAK960QDE-2AV16ABYY | TCG Enterprise SED | new or used | Enquire |
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5210 ION 960 GB | 960 GB | 540 / 130 MB/s | 40K / 7K IOPS | 1,400 TB (0.8 DWPD) | 2.8 / 3.6 W | Very read-intensive, 0.2-0.8 DWPD |
| Micron 5210 ION 1.92 TB | 1.92 TB | 540 / 260 MB/s | 70K / 13K IOPS | 2,800 TB (0.8 DWPD) | 2.8 / 3.6 W | Very read-intensive, 0.2-0.8 DWPD |
| Micron 5210 ION 3.84 TB | 3.84 TB | 540 / 350 MB/s | 83K / 6.5K IOPS | 5,600 TB (0.8 DWPD) | 2.8 / 3.6 W | Very read-intensive, 0.2-0.8 DWPD |
| Micron 5210 ION 7.68 TB | 7.68 TB | 540 / 360 MB/s | 90K / 4.5K IOPS | 11,200 TB (0.8 DWPD) | 2.8 / 3.6 W | Very read-intensive, 0.2-0.8 DWPD |
Rows are Micron 5210 ION figures at 128 KB steady state. The 960 GB column was measured on the same basis as the larger ION capacities, so the low sequential write is a property of the drive, not of the test. Other generations stay out.
QLC parts get an extra check: the bench pass writes the full span, reads it back, and captures SMART before and after so we can see how the drive behaves under sustained writes rather than bursts. Firmware and model are confirmed on power-up, and the power-loss capacitors are tested. Sealed units ship as supplied; used units are wiped before packing.
Our one-year cover applies to both conditions. Because we hold the stock, normal dispatch is within three to seven working days and tracking is issued at dispatch. Order from two pieces up, combine capacities if you need to, and expect a same-working-day quote. Tell us the part number, the condition and the quantity and we will confirm against the exact code.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV