Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
M393A1K43DB1-CWE · Samsung

Samsung 8GB DDR4-3200 RDIMM 1Rx8 Server Memory (M393A1K43DB1-CWE)

8 GB DDR4-3200 PC4-25600 ECC registered RDIMM, 1Rx8, 1.2 V, 288-pin; twenty-two ordering codes under the M393A1K43DB1 and M393A1K43DB2 revisions

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
M393A1K43DB1-CWE
Brand
Samsung
Category
Server Memory
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 8 GB
Memory Type DDR4
Speed 3200 MT/s
Form Factor RDIMM
Rank 1Rx8
ECC ECC
Voltage 1.2 V
Module Height Standard
Condition New · Used

Frequently Asked Questions

It is the same module at a later revision. Both are 8 GB DDR4-3200 single-rank x8 registered parts built from nine 8 Gb packages, with the same 1.2 V supply and the same CL22 timing. DB1 and DB2 mark successive die and raw card revisions, and no functional difference is published between them.

They are one module under eleven suffixes in each of two revisions. M393A1K43DB1 and M393A1K43DB2 fix generation, device width and revision; CWE is the 3,200 speed block; the two trailing characters are what a purchase order names, and they are identical across both families.

No, and that is the unusual part. CL22 at 1,600 MHz works out to 13.75 ns, which is slightly better than CL19 at 2,666 (14.25 ns) and CL17 at 2,400 (14.17 ns). Higher frequency with proportionally tighter timings gives more bandwidth and marginally less latency at the same time.

It posts and runs, at 2,666. DDR4 settles on the slowest module present and the module itself has no say in the result. Nothing is damaged, but the extra clock is paid for and not used, so a 2,666 part is usually the better buy for that machine.

Mixing DB1 with DB2 inside a channel will run, but keeping one revision per channel is the tidier habit and costs nothing where stock allows it. Mixing ranks is the rule that matters: two single-rank modules per channel is two ranks, and adding a two-rank module takes it to four, outside every published table.

Because the line is quoted per order. With twenty-two codes, two conditions and a speed grade that only part of the installed base can use, the per-piece number depends on the quantity and on what arrived that week. The enquiry is answered the same working day.

Samsung 8 GB DDR4-3200 ECC registered RDIMM: nine x8 packages in a single rank, 1.2 V, 288-pin. PC4-25600 at CAS latency 22, which is 13.75 ns at the 1,600 MHz clock, and 25.6 GB/s peak on a 64-bit channel.

DDR4-3200 is where the standard stops. Later increments in the family were faster only as overclock profiles, so a 3200 part is the top of the JEDEC ladder and the last step that a server chipset will train to natively. That makes this module the fastest 8 GB registered part the platform will ever see without going outside spec.

The count is nine devices — eight on the visible side of the board and one on the reverse, which is what a single 72-bit rank looks like on a 288-pin module. Twenty-two ordering codes carry it, split across two die revisions, M393A1K43DB1 and M393A1K43DB2. They sit in one table at the foot of the page.

Technical specifications

Part numberM393A1K43DB1-CWE and M393A1K43DB2-CWE — two revisions of one module, with the twenty-two ordering codes listed under Ordering codes (catalogue codes M393A1K43DB1 and M393A1K43DB2)
Capacity8 GB per module, single module
Organisation1Rx8 — one rank of nine x8 devices, 72 Gb in total on 8 Gb components, eight packages on the front of the board and one on the back
SpeedDDR4-3200, PC4-25600, 3,200 MT/s, 25.6 GB/s peak per 64-bit channel
TimingsCL22 at 1,600 MHz, 13.75 ns; JEDEC 3200AA bin
Voltage1.2 V nominal
Form factor288-pin RDIMM, standard height 31.25 mm, bare PCB with no heatspreader
RegisterOn-module register buffers the command and address bus, so the module needs a controller that supports registered memory
Error handlingECC across the 64-bit data path, plus parity on the registered command and address path
ManufactureSamsung; assembly site and date code vary by production run and are printed on the module, not fixed by the part number
ConditionNew and tested pulls, both stocked

Reading the label, field by field

A DDR4 RDIMM label is one line of code plus a date. Everything that decides compatibility is inside the code; everything that describes the batch is around it. The table separates them so neither is mistaken for the other.

Printed asMeansWhy it decides a purchase
8GBCapacity of this one moduleMultiplied across the slots it is the machine total, and it is fixed before anything is soldered
1Rx8One rank, x8 device widthAt 3,200 the timing margin is the thinnest in the family, so the lightest possible rank load matters more here than at 2,400
PC4-25600DDR4-3200 at 25.6 GB/s per channelThe number is bandwidth, not a product tier; a slower module in the same slot still posts and quietly drags the channel down
-RRegistered, not unbufferedThe register is what allows a channel to carry several modules; an unbuffered part looks identical and will not train
DB1 / DB2Successive die and raw card revisionsSame silicon generation, same capacity, rank and clock; the number distinguishes builds from different points in the production run
CWESpeed block for the 3,200 binRead it carefully: neighbouring letters in this family mean other speeds entirely, and the difference is not visible on the label at a glance
CWEC0 … CWEQBTwo-character ordering suffixWhat a purchase order names. It sorts after the speed block and cannot alter anything the earlier fields have fixed
SPD revisionTwo-digit JEDEC SPD revisionEarly firmware on a 3,200 board reads conservative SPD values, which is a compatibility question rather than a defect
YYWWDate code, year and weekThe only evidence of service life on a pull, and on this speed grade most stock has been in a chassis

The fastest standard bin is also the lowest-latency one

Latency is the clock period multiplied by the CAS count, so a module that trades cycles for frequency can end up no slower in absolute terms. Here it does slightly better than that. At 1,600 MHz a cycle is 0.625 ns and twenty-two of them is 13.75 ns; the 2,666 part runs 19 cycles at 0.75 ns for 14.25 ns, and the 2,400 part runs 17 cycles at 0.833 ns for 14.17 ns.

So this is not the usual bandwidth-for-latency trade. It is more bandwidth and slightly less latency, which is unusual enough to be worth stating plainly: 25.6 GB/s per channel against 21.3 at 2,666, and 13.75 ns against 14.25. The 3,200 bin gets there because the JEDEC timing at this grade is proportionally tighter, not because the silicon is exotic.

The catch is margin rather than performance. A 3,200 channel tolerates less capacitance and less skew, so the same physical population that holds 2,666 easily can force a derate here. That is why the single-rank build is the one to pick when every slot is going to be filled.

Where 3,200 is native, and where it is wasted

2,666 belongs to the second Scalable generation; 3,200 arrives with the third, on LGA4189, and with the EPYC 7002 series. Put this module in an older socket and it trains down — 2,933 on Cascade Lake, 2,666 on Skylake — without a warning. It is not damaged and not incompatible, simply running below its label.

Three pages in the catalogue show both sides of that line:

None of those three is a compatibility risk. The question is only whether the extra clock is going to be used, and a machine that will not train past 2,666 does not need a 3,200 part in it.

Capacity arithmetic and the rank budget at this speed

Eight slots of 8 GB is 64 GB, twelve is 96 GB, sixteen is 128 GB, twenty-four is 192 GB. All of those keep a channel at one or two ranks when filled one or two modules deep, which is the population where 3,200 survives without argument.

The rank budget is the part that changes with speed. A board that publishes 3,200 at two modules per channel and 2,666 at three ranks is telling you that rank count, not module count, is what runs out first. Single-rank 8 GB modules are the cheapest way to stay inside the tightest of those tables, and they are also the easiest to replace one at a time without disturbing the channel's rank parity.

Mixing rules and what breaks first

Speed mixes downward and silently. One 2,666 module in a channel of these takes the whole channel to 2,666, and nothing in the operating system reports the change; the evidence lives in a benchmark or a firmware log. Buying 3,200 to sit beside older stock is a way of paying for a clock the channel will not use.

Generation and buffering do not mix at all. DDR3 will not key into a DDR4 slot and no adapter changes that, DDR5 uses a different notch again, and an unbuffered module of the same capacity is electrically wrong for a registered board despite looking the same at arm's length.

Rank is the subtle one. Two single-rank modules per channel is two ranks and stays inside every published table. Add a two-rank module of the same capacity and the channel carries four, which is where the firmware starts reducing frequency on its own — and at 3,200 it has less room to absorb that than it would at 2,400.

Ordering codes, two revisions, and what to check at goods-in

Twenty-two codes carry this module, eleven under each revision. In both families M393A1K43DB1 and M393A1K43DB2 fix the generation, device width and revision; CWE is the 3,200 speed block; the two characters after it are the ordering suffix, and the eleven suffixes are identical across the two revisions. That regularity is useful: a suffix copied from one family can be read straight across to the other.

DB1 and DB2 are successive die and raw card revisions of the same design, not two products. Every source checked lists the same density, the same 1Rx8 organisation of nine 8 Gb packages, the same 3,200 clock and the same CAS latency for both, and no functional difference is published between them. What separates them is when in the production run the board was built and which raw card revision it carries.

In practice that means the revision is a matter of matching paperwork, not of choosing between capabilities. Where a bill of materials names one of the two, quote that family; where it names only the capacity and speed, either revision satisfies the line, though it is good practice to keep one revision inside a channel rather than mixing the two across the modules of a single rank budget.

The suffixes themselves are not a sequence. They begin with B, C, G or Q and continue with 0, Q or Y, and not every combination exists — so a code that looks plausible can still be one that was never built. Copy the code from the paperwork rather than constructing it.

CodeBuildBuild tailConditionQuote
M393A1K43DB1DB1 catalogueFamily code without a speed block; the DB1 build listed here is the PC4-25600 / 3,200 MT/s oneNew / usedEnquire
M393A1K43DB1-CWEDB1Base code, no suffix appendedNew / usedEnquire
M393A1K43DB1-CWEB0DB1B0New / usedEnquire
M393A1K43DB1-CWEBQDB1BQNew / usedEnquire
M393A1K43DB1-CWEBYDB1BYNew / usedEnquire
M393A1K43DB1-CWEC0DB1C0New / usedEnquire
M393A1K43DB1-CWECODB1CONew / usedEnquire
M393A1K43DB1-CWECQDB1CQNew / usedEnquire
M393A1K43DB1-CWECYDB1CYNew / usedEnquire
M393A1K43DB1-CWEGQDB1GQNew / usedEnquire
M393A1K43DB1-CWEGYDB1GYNew / usedEnquire
M393A1K43DB1-CWEQBDB1QBNew / usedEnquire
M393A1K43DB2DB2 catalogueFamily code without a speed block; the DB2 build listed here is the PC4-25600 / 3,200 MT/s oneNew / usedEnquire
M393A1K43DB2-CWEDB2Base code, no suffix appendedNew / usedEnquire
M393A1K43DB2-CWEB0DB2B0New / usedEnquire
M393A1K43DB2-CWEBQDB2BQNew / usedEnquire
M393A1K43DB2-CWEBYDB2BYNew / usedEnquire
M393A1K43DB2-CWEC0DB2C0New / usedEnquire
M393A1K43DB2-CWECODB2CONew / usedEnquire
M393A1K43DB2-CWECQDB2CQNew / usedEnquire
M393A1K43DB2-CWECYDB2CYNew / usedEnquire
M393A1K43DB2-CWEGQDB2GQNew / usedEnquire
M393A1K43DB2-CWEGYDB2GYNew / usedEnquire
M393A1K43DB2-CWEQBDB2QBNew / usedEnquire

Warranty, lead time and purchasing

Cover is one year from dispatch on both conditions, new stock and tested pulls, and it is recorded against the part number and the batch so a claim survives the loss of an invoice. Pulled modules are checked in matched sets before packing and the test sheet travels with them. Warehouse stock ships in three to seven working days with tracking at dispatch, and the minimum order is two pieces.

The page carries no price because the line is quoted. Twenty-two codes under two revisions, two conditions and a clock grade that only some platforms can use add up to a number that moves with the order, so send the code, the quantity, the condition and the platform and the answer comes back the same working day.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung 16GB DDR4-2933 RDIMM 2Rx8 Server Memory (M393A2K43CB2-CVF)
Samsung · Server Memory
Samsung 16GB DDR4-2933 RDIMM 2Rx8 Server Memory (M393A2K43CB2-CVF)

16 GB DDR4-2933 PC4-23400 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; six ordering codes under M393A2K43CB2-CVF with BY, CO, BQ, C0 and GQ tails

New Used
Request quote
MOQ 2 pc
View
Samsung 16GB DDR4-2400 RDIMM 2Rx8 Server Memory (M393A2K43BB1-CRC)
Samsung · Server Memory
Samsung 16GB DDR4-2400 RDIMM 2Rx8 Server Memory (M393A2K43BB1-CRC)

16 GB DDR4-2400 PC4-19200 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; eighteen ordering codes under the M393A2K43BB1 and M393A2K43CB1 revisions

New Used
Request quote
MOQ 2 pc
View
Samsung 16GB DDR4-2133 RDIMM 2Rx8 Server Memory (M393A2K43BB1-CPB)
Samsung · Server Memory
Samsung 16GB DDR4-2133 RDIMM 2Rx8 Server Memory (M393A2K43BB1-CPB)

16 GB DDR4-2133 PC4-17000 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; nine ordering codes from M393A2K43BB1-CPB through the CPBQ tail

New Used
Request quote
MOQ 2 pc
View
Samsung 16GB DDR4-2666 RDIMM 2Rx8 Server Memory (M393A2K43BB1-CTD)
Samsung · Server Memory
Samsung 16GB DDR4-2666 RDIMM 2Rx8 Server Memory (M393A2K43BB1-CTD)

16 GB DDR4-2666 PC4-21300 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; six ordering codes under M393A2K43BB1-CTD with 6Q, 6Y, 7Q, 7Y and 8Q tails

New Used
Request quote
MOQ 2 pc
View