8 GB DDR4-2400 PC4-19200 ECC registered RDIMM, 2Rx8, 1.2 V, 288-pin; eighteen ordering codes under the DB1 and EB1 die revisions
| Capacity | 8 GB |
|---|---|
| Memory Type | DDR4 |
| Speed | 2400 MT/s |
| Form Factor | RDIMM |
| Rank | 2Rx8 |
| ECC | ECC |
| Voltage | 1.2 V |
| Module Height | Standard |
| Condition | New · Used |
Samsung 8 GB DDR4-2400 ECC registered RDIMM, two ranks of x8 devices on a standard 288-pin registered module at 1.2 V. Rated PC4-19200 with CAS latency 17, 14.17 ns at the 1,200 MHz clock, and 19.2 GB/s peak per 64-bit channel.
The 43 in the part number is the device width: x8, not x4. Eight gigabytes from x8 devices needs eighteen of them, and because each rank holds nine, that makes two ranks rather than one. So this is the 2Rx8 version of the 8 GB DDR4-2400 module — same capacity, same speed, same device count as the 1Rx4 part on its own page, but a different rank geometry, which is what a population guide counts.
It is supplied under two die revisions, M393A1G43DB1 and M393A1G43EB1, and eighteen ordering codes in total. Both revisions are the same module electrically; the code on the BOM decides which one ships. The table further down lists all of them so an exact code can be matched without eight near-identical pages competing with each other.
| Part number | M393A1G43DB1-CRC and M393A1G43EB1-CRC — two die revisions of the same module (catalogue codes M393A1G43DB1, M393A1G43EB1) |
|---|---|
| Capacity | 8 GB per module, single module |
| Organisation | 2Rx8 — two ranks of x8 devices, nine per rank, eighteen devices for the two 72-bit paths |
| Speed | DDR4-2400, PC4-19200, 2,400 MT/s, 19.2 GB/s peak per 64-bit channel |
| Timings | CL17 at 1,200 MHz, 14.17 ns; JEDEC 2400T bin |
| Voltage | 1.2 V nominal |
| Form factor | 288-pin RDIMM, standard height 31.25 mm, bare PCB with no heatspreader |
| Register | On-module register buffers the command and address bus, so the module needs a controller that supports registered memory |
| Error handling | ECC across the 64-bit data path, plus parity on the registered command and address path |
| Manufacture | Samsung; assembly site and date code vary by production run and are printed on the module, not fixed by the part number |
| Condition | New and tested pulls, both stocked |
The label on this 2,400 MT/s module settles three things at a glance: capacity, the 2Rx8 organisation and the PC4-19200 bin, whose T letter fixes CL17. Everything else on it — revision letters, SPD level and the YYWW date — belongs to the production run, and is decoded below rather than asserted.
| Printed as | Means | Why it decides a purchase |
|---|---|---|
| 8GB | Capacity of this one module | Sets how many slots are needed for the target memory size, and it is the one number a platform setting cannot change |
| 2Rx8 | Two ranks, x8 device width | Two ranks per module is what the population guide counts; at two modules per channel that is four ranks in the channel, which is where derating starts |
| PC4-2400T | DDR4-2400, JEDEC bin T, which is CL17 | The bin letter is the timing grade, not a vendor code; a listing that says PC4-2400 without the letter has not specified latency |
| -R | Registered, not unbuffered | An unbuffered module of the same capacity looks similar from above and will not post in a registered-only board |
| DB1 / EB1 | Die revision, the block between the density field and the speed code | Same capacity, rank and speed either way; the revision records which component generation the module was built from |
| CRC00 … CRC4Y | Ordering tail, the last two characters of the code | The field a BOM or an invoice names. It does not change capacity, rank or speed, all of which are fixed earlier in the code |
| Raw card block | Revision and raw card design, the characters before the SPD number | Matters where a platform qualification list names a specific raw card for a slot population |
| SPD revision | Two-digit JEDEC SPD revision level | Older firmware reads lower revisions more reliably; this generation is old enough that the difference still shows up |
| YYWW | Date code, year and week | Age of the stock; on pulls it is the first evidence of how long the module has been in service |
A rank is exactly 72 bits wide — 64 for data, 8 for check — and an x8 device carries eight, so nine devices fill it. 8 GB therefore needs eighteen devices and two ranks on this 2,400 build; the 1Rx4 version reaches the same capacity with the same eighteen devices as one rank of x4 parts.
Guides budget ranks, not modules. Two of these at 2,400 already make four ranks in a channel, which is the population where the clock usually steps down; the 1Rx4 build of the same capacity would sit at two ranks in the same slots.
What 2Rx8 buys in exchange is availability and price. It is the common 8 GB DDR4-2400 build, because it can be made from 4 Gb x8 dies rather than the wider or denser parts the single-rank variants need, and it is what most of the installed base actually has inside it.
Eight gigabytes per slot at 2,400 is the shape of a first- or second-generation Scalable machine built to a price. One module per channel on an eight-slot board is 64 GB, twelve slots is 96 GB, sixteen is 128 GB and twenty-four is 192 GB. At one module per channel a 2Rx8 population is two ranks per channel, within every guide's limit, so the rated 2,400 is normally held.
It is also the like-for-like replacement. A machine built with 8 GB 2Rx8 parts expects two ranks per slot at 2,400; dropping in a 1Rx4 module of the same capacity changes that count without changing the label — the kind of substitution firmware notices and benchmarks eventually explain.
Count the slots before choosing a module: an 8 GB 2Rx8 population at 2,400 gives 64 GB across eight slots, 96 GB at twelve, 128 GB at sixteen and 192 GB at twenty-four. The same sixteen slots filled with 32 GB parts is 512 GB — this module is the balanced line, not the dense one.
Compatibility is settled before anything else: DDR3 will not seat in a DDR4 slot, an unbuffered module will not post in a registered-only board, and DDR5 changes the notch. What remains to choose for an 8 GB 2Rx8 part at 2,400 is capacity, rank and clock.
Mixing a 2Rx8 module with a 1Rx4 module of the same capacity is the trap on this page. Both are 8 GB at 2,400 and both will post, but the channel now carries three ranks instead of two or one, and the controller interleaves across them on the slower pattern. Where a guide publishes rank limits per channel, that combination is outside the table it was written for.
Speed is the quieter variable. Drop a 2,400 2Rx8 module among faster parts and the channel simply runs at the slower bin, with nothing in the log to announce it. Matched modules per channel, then a second matched set, keeps rank, revision and speed uniform.
2,400 MT/s arrived with the first Xeon Scalable generation and stayed native through the second, which is the speed most DDR4 servers were actually specified at. For a 2Rx8 module at this clock, three pages are the natural counterparts:
None of them rejects a 2Rx8 module at 2,400; what varies is the clock the host applies to it. The speed on the code describes capability, never the machine's setting.
Every code in the table below is the same 8 GB 2Rx8 module at 2,400 MT/s. The block before the dash fixes family, device width and die revision; the dash and its tail are what a purchase order or an invoice actually names, and Samsung publishes no public decoder for them.
On the two revisions: the same density, speed, rank and component count are listed for DB1 and EB1 by every source checked, and no functional difference is published between them. They are successive component generations of one design, which is why they are sold here as one line with two build families rather than two products. Where a BOM names one of them, quote that family; where it names neither, either revision satisfies the line, and mixing the two inside one channel is the same situation as mixing any two revisions — it will usually train, but matched revision per channel is the pattern that behaves predictably.
| Code | Build | Build tail | Condition | Quote |
|---|---|---|---|---|
| M393A1G43DB1 | DB1 catalogue | Family code without a speed block; the T build listed here is the PC4-19200 / 2,400 MT/s one | New / used | Enquire |
| M393A1G43DB1-CRC | DB1 | Base ordering code, tail not appended | New / used | Enquire |
| M393A1G43DB1-CRC00 | DB1 | 00 | New / used | Enquire |
| M393A1G43DB1-CRC0Q | DB1 | 0Q | New / used | Enquire |
| M393A1G43DB1-CRC0Y | DB1 | 0Y | New / used | Enquire |
| M393A1G43DB1-CRC30 | DB1 | 30 | New / used | Enquire |
| M393A1G43DB1-CRC3Q | DB1 | 3Q | New / used | Enquire |
| M393A1G43DB1-CRC40 | DB1 | 40 | New / used | Enquire |
| M393A1G43DB1-CRC4Q | DB1 | 4Q | New / used | Enquire |
| M393A1G43DB1-CRC4Y | DB1 | 4Y | New / used | Enquire |
| M393A1G43EB1 | EB1 catalogue | Family code without a speed block; the T build listed here is the PC4-19200 / 2,400 MT/s one | New / used | Enquire |
| M393A1G43EB1-CRC | EB1 | Base ordering code, tail not appended | New / used | Enquire |
| M393A1G43EB1-CRC00 | EB1 | 00 | New / used | Enquire |
| M393A1G43EB1-CRC0Q | EB1 | 0Q | New / used | Enquire |
| M393A1G43EB1-CRC0Y | EB1 | 0Y | New / used | Enquire |
| M393A1G43EB1-CRC30 | EB1 | 30 | New / used | Enquire |
| M393A1G43EB1-CRC3Q | EB1 | 3Q | New / used | Enquire |
| M393A1G43EB1-CRC40 | EB1 | 40 | New / used | Enquire |
| M393A1G43EB1-CRC4Q | EB1 | 4Q | New / used | Enquire |
| M393A1G43EB1-CRC4Y | EB1 | 4Y | New / used | Enquire |
Cover runs one year from dispatch on both conditions, new and pulled, logged against M393A1G43DB1-CRC and the batch so a claim never rests on the invoice surviving. Pulled stock is matched and tested before packing and the sheet travels with the order; warehouse stock leaves in three to seven working days with tracking at dispatch, two pieces minimum.
The page carries no figure because the M393A1G43DB1-CRC line is quoted per order: name the code, the quantity, the condition and the host platform, and a number comes back the same working day. With eighteen codes behind one 2,400 module, a whole-set quote is the cleaner way to buy.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
16 GB DDR4-2933 PC4-23400 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; six ordering codes under M393A2K43CB2-CVF with BY, CO, BQ, C0 and GQ tails
16 GB DDR4-2400 PC4-19200 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; eighteen ordering codes under the M393A2K43BB1 and M393A2K43CB1 revisions
16 GB DDR4-2133 PC4-17000 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; nine ordering codes from M393A2K43BB1-CPB through the CPBQ tail
16 GB DDR4-2666 PC4-21300 ECC registered RDIMM, 2Rx8 on eighteen 8 Gb x8 packages, 1.2 V, 288-pin; six ordering codes under M393A2K43BB1-CTD with 6Q, 6Y, 7Q, 7Y and 8Q tails