3.8 GHz / 4 Cores / 8 Threads / 16.5 MB Cache / 105 W / 4-Socket
| Socket | LGA3647 |
|---|---|
| Series | Xeon Gold |
| Generation | 2nd Gen (Cascade Lake) |
| Cores | 4 |
| Memory Type | DDR4 RDIMM · DDR4 LRDIMM · DDR4 3DS RDIMM |
| Max Memory Speed | 2933 MHz |
| PCIe Version | PCIe 3.0 |
| Lithography | 14 nm |
| Memory Channels | 6 channels |
| Condition | New · Used |
| Threads | 8 |
| Base Frequency | 3.8 GHz |
| Max Turbo Frequency | 3.9 GHz |
| Cache | 16.5 MB |
| TDP | 105 W |
Intel Xeon Gold 5222 — 4 cores and 8 threads at 3.8 GHz base / 3.9 GHz turbo, 16.5 MB cache, 105 W TDP, with two UPI links and four-socket scalability in FCLGA3647 packaging. Supplied new or as tested pulls, with a 1-year warranty.
The number that matters on this part is not 3.8 GHz on its own — it is that the turbo ceiling is 3.9 GHz, only 100 MHz above base. Almost every other Xeon in this generation quotes a turbo several hundred megahertz above its base clock and spends most of a real workload well below that peak. Here the two numbers are effectively the same, which means 3.8 GHz is a sustained figure rather than a burst. For a workload that needs predictable per-thread latency — simulation, place-and-route, real-time control, single-instance databases — that is worth more than a higher number you only see for a second.
The cache arithmetic is the other side of it: 16.5 MB across four cores is 4.125 MB per core. Only the eight-core Xeon Gold 6250 goes deeper in this range, at 4.47 MB. A working set of several hundred megabytes stays resident, so the cores are not waiting on memory while they run.
Here is the comparison that decides most purchases. The Platinum 8256 is the same silicon at the same numbers — 4 cores, 3.8/3.9 GHz, 16.5 MB, 105 W, TCASE 72 °C, DDR4-2933 — and differs in one respect: it scales to eight sockets with three UPI links, where this Gold part stops at four sockets with two. Up to four sockets the two are interchangeable, and the Gold part costs a fraction of the Platinum order line. Only an eight-socket machine needs the other one.
Four cores is a deliberate shape, not a stripped part. It is the configuration for software whose licence is priced per core, or whose threads cannot be parallelised past a handful, and where the answer is therefore frequency and cache rather than core count. Four sockets of 5222 gives 16 cores at 3.8 GHz with 66 MB of aggregate L3 — a scale-up shape that a single 16-core part at 2.8 GHz cannot match on per-thread work.
The thermal requirement is moderate but not trivial: TCASE 72 °C at 105 W leaves about 0.35 °C/W for the heatsink from a 35 °C inlet. A 72 °C case limit is stricter than the 85 °C parts at 150 W, so a chassis validated for a 130 W eight-core SKU is the right starting point; do not assume a low TDP automatically means an easy thermal fit.
The platform is the standard Gold set: six channels of DDR4-2933 to 1 TB per socket, PCIe 3.0 with 48 lanes, Optane persistent memory support, AVX-512 with two FMA units, DL Boost (VNNI), Intel RDT, Intel VMD and Run Sure. There is no Speed Select table on this SKU and embedded options are not available.
| Product collection | 2nd Gen Intel Xeon Scalable (Cascade Lake) |
|---|---|
| Processor number / sSpec | 5222 / SRF8V |
| Ordering code | CD8069504193501 (tray, B1 stepping; no boxed SKU) |
| Cores / Threads | 4 / 8 (Hyper-Threading) |
| Base / Max turbo frequency | 3.8 GHz / 3.9 GHz |
| Cache | 16.5 MB (4.125 MB per core) |
| TDP | 105 W (TCASE 72 °C) |
| Socket | FCLGA3647 (FC-LGA14B, 76.0 mm × 56.5 mm) |
| Memory | 6 channels DDR4-2933, up to 1 TB per socket, ECC RDIMM / LRDIMM / 3DS RDIMM, Optane persistent memory supported |
| Scalability | 4S (up to four sockets), 2 UPI links at 10.4 GT/s |
| PCIe | 3.0, 48 lanes |
| Speed Select | SST – Performance Profile: no; SST – Base Frequency: no |
| Lithography | 14 nm |
| Launch | Q2 2019 |
| Status | Discontinued (End of Servicing Updates 30 June 2025) |
| Embedded options | Not available |
| Accelerators | AVX-512 with 2 FMA units, Intel DL Boost (VNNI), Intel RDT, Intel VMD, Run Sure |
The 5222 fits FCLGA3647 boards whose BIOS supports 2nd Gen Xeon Scalable Cascade Lake parts, in one-, two- and four-socket configurations:
Two checks before ordering. Confirm the board's processor support list includes the four-core Gold SKUs, since many 1U chassis were validated around eight- and sixteen-core parts. And check the heatsink against the 72 °C case limit rather than the 105 W figure alone — the low wattage does not make this an easy thermal fit.
| Processor | Generation | Cores / Threads | Base / Max turbo | Cache | TDP | Memory support |
|---|---|---|---|---|---|---|
| Xeon Gold 5222 | 2nd Gen (Cascade Lake) | 4 / 8 | 3.8 / 3.9 GHz | 16.5 MB | 105 W | 6ch DDR4-2933 · 1 TB · 4S |
| Xeon Platinum 8256 | 2nd Gen (Cascade Lake) | 4 / 8 | 3.8 / 3.9 GHz | 16.5 MB | 105 W | 6ch DDR4-2933 · 1 TB · 8S |
| Xeon Gold 6234 | 2nd Gen (Cascade Lake) | 8 / 16 | 3.3 / 4.0 GHz | 24.75 MB | 130 W | 6ch DDR4-2933 · 1 TB · 4S |
| Xeon Gold 6244 | 2nd Gen (Cascade Lake) | 8 / 16 | 3.6 / 4.4 GHz | 24.75 MB | 150 W | 6ch DDR4-2933 · 1 TB · 4S |
| Xeon Gold 6250 | 2nd Gen (Cascade Lake) | 8 / 16 | 3.9 / 4.5 GHz | 35.75 MB | 185 W | 6ch DDR4-2933 · 1 TB · 4S |
| Xeon Gold 6242 | 2nd Gen (Cascade Lake) | 16 / 32 | 2.8 / 3.9 GHz | 22 MB | 150 W | 6ch DDR4-2933 · 1 TB · 4S |
Against the 8256 nothing changes below eight sockets: same cores, same clocks, same cache, same 105 W and the same 72 °C case limit. The Platinum part carries a third UPI link and 8S scalability; four sockets or fewer, this is the same processor for far less money.
Against the 6234 you give up four cores and 8.25 MB and gain 500 MHz of base clock and 25 W less heat. For a per-core workload the 5222 is quicker on every thread; for a thread-hungry workload the 6234 does twice the work per socket.
Against the 6244 the gap is wider still: 300 MHz of base and 500 MHz of turbo in the 6244's favour, for twice the cores and 45 W more. The 6244 is the better eight-core part; the 5222 is the better four-core one, and they are answering different questions.
Against the 6250 the comparison is the closest in the range: 100 MHz of base, 600 MHz of turbo, four cores and 19.25 MB in the 6250's favour, against 80 W and a 60 °C case limit that demands a high-performance heatsink. Where the chassis can cool 185 W properly, the 6250 is the fastest per-core part in the family; where it cannot, this is the four-core answer that fits.
Every processor carries a 1-year warranty against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested stock rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch; volume orders are quoted individually with lead time confirmed at the time of enquiry.
Pricing is quoted per order because condition and quantity both move it. Send the quantity, the condition you need and the server model the part is going into, and you will get a quote with lead time the same working day. If the machine holds eight sockets rather than four, tell us before ordering — this SKU stops at four, and the Platinum 8256 is the part that goes further.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
2.1 GHz / 8 Cores / 16 Threads / 11 MB Cache / 85 W / 78 °C TCASE
2.2 GHz / 8 Cores / 16 Threads / 11 MB Cache / 70 W / 91 °C TCASE
2.3 GHz / 10 Cores / 20 Threads / 13.75 MB Cache / 95 W / 91 °C TCASE
2.4 GHz / 10 Cores / 20 Threads / 13.75 MB Cache / 100 W / 2-Socket